| dc.contributor.author |
Boles, P.J. |
|
| dc.contributor.author |
Boashash, B |
|
| dc.date.accessioned |
2011-08-09T13:36:18Z |
|
| dc.date.available |
2011-08-09T13:36:18Z |
|
| dc.date.issued |
1988-04 |
|
| dc.identifier.citation |
International Conference on Acoustics, Speech, and Signal Processing, 1988. ICASSP-88., Issue Date : 11-14 Apr 1988 ,On page(s): 904 |
en_US |
| dc.identifier.issn |
1520-6149 |
|
| dc.identifier.uri |
http://hdl.handle.net/10576/10734 |
|
| dc.description |
(The most recent upgrade of the original software package that calculates Time-Frequency Distributions and Instantaneous Frequency estimators can be downloaded from the web site: www.time-frequency.net. This was the first software developed in the field, and it was first released publicly in 1987 at the 1st ISSPA conference held in Brisbane, Australia., and then continuously updated). A companion is the comprehensive book on Time-Frequency Signal Analysis and Processing available at: http://www.elsevier.com/locate/isbn/0080443354 |
en_US |
| dc.description.abstract |
The Wigner-Ville distribution (WVD) has been shown to concentrate signal energy along the instantaneous frequency law of an emitted Vibroseis source signal. Thus, the WVD is proposed as a basis for achieving event separation for a received Vibroseis signal in the time-frequency (t-f) plane. The WVD has previously been used to determine Earth absorption parameters from the first down going arrival of a Vibroseis signal from a vertical seismic profile (VSP). This method can be extended to the multicomponent signal case, but only if a successful t-f plane event separation can be achieved. This is obtained by using the cross Wigner-Ville distribution (XWVD). The authors also show that the XWVD can be used as the basis for absorption and dispersion determination from a received Vibroseis signal, and for a two dimensional processing of VSP data. |
en_US |
| dc.language.iso |
en |
en_US |
| dc.publisher |
IEEE |
en_US |
| dc.subject |
Earth absorption parameters |
en_US |
| dc.subject |
Vibroseis seismic signals |
en_US |
| dc.subject |
Wigner-Ville distribution |
en_US |
| dc.subject |
absorption determination |
en_US |
| dc.subject |
cross Wigner-Ville distribution |
en_US |
| dc.subject |
dispersion determination |
en_US |
| dc.subject |
emitted Vibroseis source signal |
en_US |
| dc.subject |
event separation |
en_US |
| dc.subject |
filtering |
en_US |
| dc.subject |
instantaneous frequency law |
en_US |
| dc.subject |
multicomponent signal |
en_US |
| dc.subject |
signal energy |
en_US |
| dc.subject |
signal processing |
en_US |
| dc.subject |
time-frequency plane |
en_US |
| dc.subject |
two dimensional processing |
en_US |
| dc.subject |
time-frequency distributions |
en_US |
| dc.subject |
quadratic TFDs |
en_US |
| dc.subject |
Oil exploration |
en_US |
| dc.subject |
Geophysics prospecting |
en_US |
| dc.title |
The cross Wigner-Ville distribution-a two dimensional analysis method for the processing of Vibroseis seismic signals |
en_US |
| dc.type |
Article |
en_US |