Search
Now showing items 31-40 of 47
Bio-Inspired Fabrication of Ultrafiltration Membranes Incorporating Polydopamine Functionalized Graphene Oxide Nanoparticles
(Environmental Engineering, 2021 , Dissertation)
Graphene oxide (GO) and its based materials have gained a significant interest in the membrane functionalization sector in the recent years. Inspired by their unique and tunable properties, several GO-based nanomaterials ...
Characterizing trapped NAPL in pore networks of unconsolidated sand using synchrotron micro-computed tomography
(Environmental Engineering, 2021 , Master Thesis)
The purpose of this research paper was to determine the correlation of occupancy percentage against the pore radius and coordination numbers for each pore space. X-ray micro-computed tomography images were taken for the ...
Development and Performance Test of Choline Chloride Based Natural Deep Eutectic Solvent for Separation of Colloidal Suspensions
(Environmental Engineering, 2021 , Master Thesis)
Clay minerals such as bentonite are considered as a valuable raw material for a
variety of industrial applications including drilling fluids for oil and gas industries,
cosmetics, papermaking, paint and dyes, pharmaceutical, ...
HARVESTING OF CHLORELLA SP. MICROALGAE BY DIELECTROPHORETIC FORCE USING TITANIUM DIOXIDE (TiO2) INSULATED ELECTRODES
(Environmental Engineering, 2022 , Master Thesis)
The harvesting of microalgae using conventional technologies suffers from biomass contamination, high energy consumption and long processing time. In this study, titanium dioxide (TiO2) insulated stainless steel electrodes ...
MODELLING AND OPTIMIZATION OF A MULTI-POPULATION, SINGLE-CHAMBER MICROBIAL FUEL CELL OPERATING IN A CONTINUOUS FLOW MODE AT STEADY-STATE
(Environmental Engineering, 2022 , Master Thesis)
There is no doubt that energy demand has been increased in the last decade due to the economic revolution. However, this revolution is based on the fossils fuel which are going to be depleted. Microbial fuel cells are one ...
An investigation into fouling, wetting and their mitigation using commercial Antiscalant in membrane distillation desalination
(Environmental Engineering, 2017 , Master Thesis)
An experimental investigation into membrane fouling and loss of hydrophobicity was carried out in direct contact membrane distillation (DCMD) desalination of high salinity seawater. The membrane used was a commercial ...
SUSTAINABLE DESIGN AND ANALYSIS FOR GASOLINE PRODUCED FROM GTL AND MTG PROCESSES: PROCESS SIMULATION, TECHNO-ECONOMIC, AND ENVIRONMENT ASSESSMENT
(Environmental Engineering, 2023 , Master Thesis)
The global energy demand will continue to expand as the world population grows. Energy and environmental concerns are closely related since it is nearly difficult to create, transfer, or consume energy without having a ...
INFLUENCE OF METAL OXIDE COATINGS ON THE PERFORMANCE OF HIGH-VOLTAGE LiNi0.5Mn1.5O4 (LNMO) CATHODE MATERIALS FOR RECHARGEABLE LITHIUM-ION BATTERIES (LIBS)
(Environmental Engineering, 2023 , Master Thesis)
Lithium-ion batteries (LIBs) have been publicized as suitable candidates for their utilization in portable electronics and electric vehicles (EVs). This move has been made in the past decade to address global warming and ...
BIOTREATMENT OF GTL PROCESS WATER AND PESTICIDES CONTAMINATED WATER USING PSEUDOMONAS AERUGINOSA: A COMPARATIVE STUDY
(Environmental Engineering, 2023 , Master Thesis)
Over 40% of the world's population suffers from water scarcity, a problem that is expected to get worse because of global warming and desertification. Therefore, the mean of treatment and reuse of wastewater has become ...
RIGOROUS SIMULATION AND OPTIMIZATION OF THE COLD SECTION IN A REAL LNG PLANT: UPFRONT NITROGEN REMOVAL AS PROCESS ENHANCING CONCEPT
(Environmental Engineering, 2023 , Master Thesis)
The global demand for LNG is expected to continue increasing over the next decays. Qatar, as one of the largest LNG exporters with a 22% global share, announced in 2020 a plan to increase the production capacity by more ...