تصفح Center for Advanced Materials Research حسب العنوان
السجلات المعروضة 250 -- 269 من 1289
-
Desalination in the GCC countries- a review
( Elsevier Ltd , 2022 , Article Review)The Gulf Cooperation Council (GCC) countries are located in one of the most arid regions in the world with very less freshwater resources, and hence depending on desalination plants to tackle the water scarcity and satisfy ... -
Design and Development of Inexpensive Paper-Based Chemosensors for Detection of Divalent Copper
( Springer Nature , 2023 , Article)Abstract: Simple, portable, and low-cost paper-based sensors are alternative devices that have the potential to replace high-cost sensing technologies. The compatibility of the paper base biosensors for both chemical and ... -
Design and development of novel computer vision-based automatic calibration system for analog dial pressure gauge
( American Society for Testing and Materials , 2022 , Article)Pressure gauge calibration refers to comparing the standard and test gauge to determine the error percentage. The reading accuracy of the analog dial pressure gauge is found in the conventional method through manual ... -
Design and experimental analysis of solar-powered water desalination system using humidification?dehumidification
( Taylor and Francis Ltd. , 2020 , Article)Desalination with solar-powered air heating and packed bed humidification is designed and fabricated using locally available materials. The system with fined type dehumidifier is designed using the LMTD method. There are ... -
Design of hybrid clay/ polypyrrole decorated with silver and zinc oxide nanoparticles for anticorrosive and antibacterial applications
( Elsevier , 2020 , Article)In this work, a novel and cost-effective bentonite intercalated with polypyrrole Zinc oxide-silver nanocomposite (B-PPy/ZnO) hybrid material was prepared via in situ photopolymerization of pyrrole in the presence of silanized ... -
Design, development and techno economic analysis of novel parabolic trough collector for low-temperature water heating applications
( Elsevier Ltd , 2021 , Article)The primary objective of this experimentation is to develop and evaluate indigenous PTC capable of producing hot water for low-temperature applications. A new parabolic trough collector is designed; which is easy to ... -
Designing and performance evaluation of polyelectrolyte multilayered composite smart coatings
( Elsevier B.V. , 2019 , Article)This work reports the synthesis of polyelectrolyte microcapsules and its effect on the anti-corrosion performance of polymeric coating applied on steel substrates. In situ polymerization technique was used for the synthesis ... -
Designing carbon nanotube-based oil absorbing membranes from gamma irradiated and electrospun polystyrene nanocomposites
( MDPI AG , 2019 , Article)Carbon-based materials are outstanding candidates for oil spill clean-ups due to their superhydrophobicity, high surface area, chemical inertness, low density, recyclability, and selectivity. The current work deals with ... -
Designing dual phase sensing materials from polyaniline filled styrene-isoprene-styrene composites
( Elsevier Ltd , 2014 , Article)The demand for developing oil detectors is ever increasing since the cleanup and recovery from oil spill usually take long time. Here we propose oil sensors made of polyaniline (PANI) filled poly(styrene-isoprene-styrene) ... -
Designing Flexible and Porous Fibrous Membranes for Oil Water Separation-A Review of Recent Developments
( Bellwether Publishing, Ltd. , 2020 , Article Review)Oil sorbent membranes are highly effective materials in combating oil spills. Recent technological advancements in membrane preparations permit higher oil-sorption efficiency and easier oil recoverability. This review ... -
Designing piezoelectric nanogenerator from PVDFHFP nanocomposite fibers containing cellulose nanocrystals and Fedoped ZnO
( Hamad bin Khalifa University Press (HBKU Press) , 2018 , Conference Paper)Self-powering devices harvest energy from the environment and perform based on a maintenance free approach. These materials are of utmost significance as they solve the problems associated with the energy crisis and ... -
Developing Polyaniline Filled Isoprene Composite Fibers by Electrospinning: Effect of Filler Concentration on the Morphology and Glass Transition
( Pleiades Publishing , 2019 , Article)Abstract: Sub micron and nano level fibers are produced from the polymer melts by applying an external electric field during electrospinning; however very few studies are reported on elastomer scaffolds formed by this ... -
Development and characterizations of Ag nanoparticles decorated TiO2-ZrO2 coatings as electrode material for supercapacitors
( Elsevier , 2023 , Article)Supercapacitors are considered as newly developed auxiliary and clean supplies of power and energy for the next generation energy storage devices with significant impact in many fields. In the present investigation, Ag ... -
Development and Fabrication of Carbon Nanotube (CNT)/CuO Nanocomposite for Volatile Organic Compounds (VOCs) Gas Sensor Application
( John Wiley and Sons Inc , 2021 , Article)Volatile organic compounds (VOCs) have been recognized as one of the primary trace segments of atmospheric air pollutants. The change in the level of VOCs in the surrounding environment can lead to chronic health issues, ... -
Development and Properties of Amorphous Particles Reinforced Al Matrix Nanocomposites
( Elsevier , 2021 , Book chapter)Aluminum metal matrix composites (AMMCs) fabricated by reinforcing aluminum matrix with ceramic particles have received considerable attention because of their superior properties over monolithic aluminum matrix. However, ... -
Development and properties of polymeric nanocomposite coatings
( MDPI AG , 2019 , Article)Polymeric-based nanocomposite coatings were synthesized by reinforcing epoxy matrix with titanium nanotubes (TNTs) loaded with dodecylamine (DOC). The performance of the developed nanocomposite coatings was investigated ... -
Development of multifunctional nano/ultrafiltration membrane based on a chitosan thin film on alginate electrospun nanofibers.
( Elsevier , 2017 , Article)The aim of this study was to develop a high flux three-tier composite membrane composed of a coating layer based on chitosan and chitosan with silver nanoparticles, electrospun alginate nanofibres as a midlayer and ... -
Development of organic-inorganic halide perovskites (OHPs) based memristors
( Qatar University Press , 2021 , Poster)Organic - inorganic halide perovskite (OHP) has drawn researchers' attention working in the field of optoelectronics from last ten years due to its remarkable optical properties such as adjustable band gap, ambipolar charge ... -
Development of sustainable geopolymer composites for repair application: Workability and setting time evaluation
( Elsevier , 2023 , Other)One of the most used construction materials worldwide is concrete. It has a lot of advantages over the other construction materials. However, the production process of concrete produces a huge amount of carbon dioxide. ... -
Development of value-added polyethylene grades with extended service lifetime: Weathering resistant flame retarded materials for outdoor applications
( John Wiley and Sons Inc , 2021 , Article)The current article deals with the development of different novel, tailor-made polyolefin formulations exhibiting both low flammability and high weathering resistance, so as to provide value-added polyethylene grades with ...