تصفح Center for Advanced Materials Research حسب تاريخ النشر
السجلات المعروضة 61 -- 80 من 1303
-
Microstructure evolution and mechanical properties of twinned AZ31 alloy plates at lower elevated temperature
( Elsevier Ltd , 2014 , Article)The AZ31 alloy plates were pre-rolled at room temperature along the transverse direction to introduce extension twinning. The effect of pre-existing twins on the mechanical properties of AZ31 alloy plates at lower elevated ... -
Quadrupolar benzobisthiazole-cored arylamines as highly efficient two-photon absorbing fluorophores
( American Chemical Society , 2014 , Article)A computer-aided design of novel D-?-A-?-D styrylamines containing five isomeric benzobisthiazole moieties as the electron-accepting core has revealed the linear centrosymmetric benzo[1,2-d:4,5-d?]bisthiazole as the most ... -
Compatibilizing role of carbon nanotubes in poly(vinyl alcohol)/starch blend
( WILEY-VCH Verlag GmbH & Co. , 2015 , Article)Polymer nanocomposites based on poly(vinyl alcohol)/starch blend and carbon nanotubes (CNT) were prepared by solution mixing, followed by casting. Glycerol was used as a plasticizer and added in the starch dispersion. The ... -
Storage and Release of Thermal Energy of Phase Change Materials Based on Linear Low Density of Polyethylene, Parafin Wax and Expanded Graphite
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
Adhesion Improvement Between Polyethylene and Aluminum Using Eco-Friendly Plasma Treatment
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
Poreless Separator and Electrolyte Additive for Lithium-Sulfur Batteries with High Areal Energy Densities
( WILEY-VCH Verlag , 2015 , Article)Despite the attractive theoretical capacity of sulfur over 1600 mA h g−1, lithium–sulfur (Li–S) batteries suffer from insufficient cycle lives mainly due to fatal polysulfide dissolution. This chronic drawback becomes ... -
Interface modification of compatibilized polyethylene terephthalate/polypropylene blends: Effect of compatibilization on thermomechanical properties and thermal stability
( WILEY-VCH Verlag , 2015 , Article)Polyethylene terephthalate (PET) and polypropylene (PP) are incompatible thermoplastics because of differences in chemical structure and polarity, hence their blends possess inferior mechanical and thermal properties. ... -
The effect of expanded graphite on the physical properties of conductive EVA/wax phase change blends for thermal energy storage
( John Wiley & Sons, Ltd. , 2015 , Article)A study of the morphology, dynamic mechanical, impact, and tensile properties of ethylene vinyl acetate copolymer (EVA)/expanded graphite (EG) and EVA/wax/EG composites is presented. The composites were prepared by melt ... -
Cuprous oxide nanoparticles in epoxy network: Cure reaction, morphology, and thermal stability
( John Wiley & Sons, Ltd. , 2015 , Article)Nanosized cuprous oxide filler particles (nCOP) with octahedral morphology were synthesized through hydrazine reduction method and were used to develop a novel nanocomposites based on epoxy resin. The morphology of epoxy–nCOP ... -
Effect of Operational Parameters on the Behavior of Phosphorus and Sulfur in Aluminum Reduction
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
Electrochemical Deposition of High Purity Silicon from Molten Salts
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
The Performance of Aluminium Electrolysis in Cryolite Based Electrolytes Containing LiF, KF and MgF2
( John Wiley & Sons, Inc. , 2015 , Book chapter) -
Effect of graphene loading on thermomechanical properties of poly(vinyl alcohol)/starch blend
( Wiley Periodicals, Inc. , 2015 , Article)Polymer nanocomposites based on poly(vinyl alcohol) (PVA)/starch blend and graphene were prepared by solution mixing and casting. Glycerol was used as a plasticizer and added in the starch dispersion. The uniform dispersion ... -
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler
( Wiley Periodicals, Inc. , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ... -
Monolayer polymer photocells. The opportunities
( Academy of Sciences and Arts of the Republic of Serbia , 2015 , Article)The conversion of solar energy into electricity is in the focus of a large number of scientists. Because of the problems caused by the use of fossil fuels, the use of renewable and environmentally friendly energy sources ... -
Influence of the presence of medium-soft paraffin wax on the morphology and properties of iPP/silver nanocomposites
( Budapest University of Technology , 2015 , Article)The aim of this study was to investigate the presence of wax, different Ag nanoparticle contents, and different cooling rates from the melt, on the morphology, thermal and electrical conductivity, and dynamic mechanical ... -
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler.
( Wiley , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ... -
Editorial: Using thermogravimetric analysis to determine polymer thermal stability: Relevance of changes in onset temperature of mass loss
( Budapest University of Technology , 2015 , Article)Editorial -
Prediction of the mechanical properties of copper powder-filled low-density polyethylene composites. A comparison between the ANN and theoretical models
( Begell House , 2015 , Article)In the present study, the mechanical properties of copper (Cu) powder-filled low-density polyethylene (LDPE) composites are predicted by using artificial neural networks (ANNs) as a function of the filler concentration. ... -
Highly ordered nanoporous carbon films with tunable pore diameters and their excellent sensing properties
( Wiley-VCH Verlag , 2015 , Article)Ordered porous carbon films with tunable pore diameters, immobilized with glucose oxidase (GOD) have been fabricated and employed for the construction of a biosensor for glucose molecules. The as-prepared porous films have ...