Browsing Center for Advanced Materials Research by Title
Now showing items 748-767 of 1281
-
Microtron Irradiation Induced Tuning of Band Gap and Photoresponse of Al-ZnO Thin Films Synthesized by mSILAR
( Springer New York LLC , 2016 , Article)Al-doped polycrystalline nano ZnO (Al-ZnO) thin films with different doping concentrations were successfully prepared by the microwave-assisted successive ionic layer adsorption and reaction (mSILAR) technique. The structural ... -
Microwave rapid sintering of al-metal matrix composites: A review on the effect of reinforcements, microstructure and mechanical properties
( MDPI AG , 2016 , Article Review)Aluminum metal matrix composites (AMMCs) are light-weight materials having wide-spread use in the automobile and aerospace industries due to their attractive physical and mechanical properties. The promising mechanical ... -
Mineralization of dichloromethane using solar-oxidation and activated TiO2: Pilot scale study
( Elsevier Ltd , 2018 , Article)The oxidation of gaseous dichloromethane (DCM) by advanced oxidation technology, advanced solar oxidation technology, biological treatment, and the combination of solar advanced oxidation technology and biological treatment ... -
Mixed Zwitterion-Based Self-Assembled Monolayer Interface for Impedimetric Glycomic Analyses of Human IgG Samples in an Array Format
( American Chemical Society , 2016 , Article)An impedimetric lectin biosensor for the detection of changes in the glycan structure of antibodies isolated from human serum is here correlated with the progression of rheumatoid arthritis (RA). The biosensor was built ... -
Modeling and piezoelectric analysis of nano energy harvesters
( MDPI , 2020 , Article)The expedient way for the development of microelectromechanical systems (MEMS) based devices are based on two key steps. First, perform the simulation for the optimization of various parameters by using different simulation ... -
Modeling and sensitivity analysis of the forward osmosis process to predict membrane flux using a novel combination of neural network and response surface methodology techniques
( MDPI AG , 2021 , Article)The forward osmosis (FO) process is an emerging technology that has been considered as an alternative to desalination due to its low energy consumption and less severe reversible fouling. Artificial neural networks (ANNs) ... -
Modeling of forward osmosis process using artificial neural networks (ANN) to predict the permeate flux
( Elsevier , 2020 , Article)Artificial neural networks (ANN) are black box models that are becoming more popular than transport-based models due to their high accuracy and less computational time in predictions. The literature shows a lack of ANN ... -
Modeling polymeric gels: The role of chain flexibility on the structure of physical gels
( BME-PT and GTE , 2017 , Article)Using molecular dynamics simulations and a simple model for chain molecules we study the gel formation under different conditions. The main characteristic of the model is the short attractive range of the non-bonding ... -
Modelling and performance analysis of electric vehicle
( Taylor and Francis Ltd. , 2021 , Article)Conventional vehicles utilise petroleum-derived fuels for providing good performance and long-range speed. Due to the utilisation of petrol or diesel, there are few disadvantages such low fuel economy and exhaust gas ... -
Modification of polyethylene by RF plasma in different/mixture gases
( MDPI AG , 2019 , Article)Herein, low-density polyethylene (LDPE) films were treated using radio-frequency plasma discharge in the presence of air, nitrogen, oxygen, argon, and their mixtures to introduce new chemical functionalities. The surface ... -
Modified halloysite nanotubes decorated with Ceria for synergistic corrosion inhibition of Polyolefin based smart composite coatings
( Elsevier , 2023 , Article)The deteriorating effect of corrosion can be controlled by applying suitable polymeric-based coatings. In this work, polyolefin based smart composite coatings containing modified halloysite nanotubes decorated with ceria ... -
Modified os sepiae of Sepiella inermis as a low cost, sustainable, bio-based adsorbent for the effective remediation of boron from aqueous solution
( Springer Science and Business Media Deutschland GmbH , 2022 , Article)The occurrence of boron in low concentration is essential; however, a higher concentration of boron source in water has a toxic effect on humans as well as have retard effect on agricultural plant growth. Thus, the affordable ... -
Modulation of wettability, gradient and adhesion on self-assembled monolayer by counterion exchange and pH
( Academic Press Inc. , 2018 , Article)In this study, two quaternary ammonium salts derived from L-lipoic acid were applied for self-assembled monolayers formation on rough structured gold surface. The derivatives differ in functionality since one possesses ... -
Molecular and Structural Changes in Induced-Brain Stroke Tissue Using FTIR Imaging Spectroscopy, Scanning Electron and Atomic Force Microscopy
( Hamad bin Khalifa University Press (HBKU Press) , 2016 , Conference Paper)1. Background: Stroke, i.e. loss of brain function(s) due to disturbance in the blood supply to the brain, is the main cause of adult disability (e.g. paralysis) in the world, leaving more than half of the patients dependent ... -
Molecular scale cure rate dependence of thermoset matrix polymers
( Elsevier B.V. , 2016 , Article)This manuscript demonstrates the molecular scale cure rate dependence of di-functional epoxide based thermoset polymers cured with amines. A series of cure heating ramp rates were used to determine the influence of ramp ... -
Monitoring of under deposit corrosion for the oil and gas industry: A review
(2021 , Article Review)Internal corrosion due to under deposit corrosion (UDC) is responsible for at least 20% of incidents in the oil and gas industry. As a result, over the past decade, UDC has received much attention from researchers, corrosion ... -
Monolayer polymer photocells. The opportunities
( Academy of Sciences and Arts of the Republic of Serbia , 2015 , Article)The conversion of solar energy into electricity is in the focus of a large number of scientists. Because of the problems caused by the use of fossil fuels, the use of renewable and environmentally friendly energy sources ... -
Morphology analysis
( Elsevier , 2020 , Book chapter)This chapter is dedicated to the surface morphology and topography analyses of various types of polymers in terms of their structural conformations and resulting material structures. The morphology of polymers includes ... -
Morphology and magnetic properties of the ethylene-co-vinyl acetate/iron nanocomposite films prepared by implantation with Fe6+ ions
( Elsevier , 2016 , Article)Ethylene-co-vinyl acetate/iron nanocomposite films were fabricated by implantation with multiplecharged ions at different fluencies. The films obtained with ion fluency of 1 × 1017cm−2were used forspecific studies. It was ... -
Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
( Springer , 2016 , Article)This paper reports on the morphologies of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites prepared by melt compounding with various MCM-41 contents in the range of 0.1–5 wt%, the interactions between ...