بحث بسيط
السجلات المعروضة 11 -- 20 من 46
Tailoring of the thermal, mechanical and dielectric properties of the polypropylene foams using gamma-irradiation
(
Elsevier Ltd
, 2016 , Article)
This study investigate the influence of gamma-irradiation (GI) doses from 0 up to 50 kGy on the polypropylene (PP) foams, mainly the impact on their structural and physical properties. It was found that structural properties ...
Comparison of the effect of carbon, halloysite and titania nanotubes on the mechanical and thermal properties of LDPE based nanocomposite films
(
Chemical Industry Press
, 2018 , Article)
In this study, titania nanotubes (TNTs) were prepared by hydrothermal method with the aim to compare the properties of these one-dimensional tubular nanostructures' reinforced nanocomposites with the carbon and halloysite ...
The mechanical and adhesive properties of electrically and thermally conductive polymeric composites based on high density polyethylene filled with nickel powder
(
Elsevier, Ltd
, 2013 , Article)
Electrically and thermally conductive composites made using high density polyethylene (HDPE) matrix blended with a special grade of branch-structured nickel particles were studied. Composites with high filler content were ...
Improvement of ternary recycled polymer blend reinforced with date palm fibre
(
Elsevier, Ltd
, 2014 , Article)
This paper investigates the study and preparation of date palm fibre reinforced recycled polymer blend composites. This is the first paper which describes the recycled polymer ternary blends of (1) recycled low density ...
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
(
Elsevier, Ltd
, 2014 , Article)
Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ...
Crystallization and dielectric behavior of PLA and PHBV in PLA/PHBV blends and PLA/PHBV/TIO 2 nanocomposites
(
BME-PT and GTE
, 2019 , Article)
The morphology, crystallization behavior and mechanical properties of PLA, PHBV and their blends and nanocomposites with TiO 2 as filler were investigated. An uncommon morphological change was observed with increasing PLA ...
Enhanced performance of nano-sized SiC reinforced Al metal matrix nanocomposites synthesized through microwave sintering and hot extrusion techniques
(
Elsevier B.V.
, 2017 , Article)
In the present study, nano-sized SiC (0, 0.3, 0.5, 1.0 and 1.5 vol%) reinforced aluminum (Al) metal matrix composites were fabricated by microwave sintering and hot extrusion techniques. The structural (XRD, SEM), mechanical ...
The Mechanical and Thermal Response of Shape Memory Alloy-Reinforced Aluminum Nanocomposites
(
Springer
, 2019 , Conference Paper)
The concept of developing intelligent materials that has the innate capability of healing its damage has engineered considerable scientific and even technological interest due on account of its potential for selection and ...
Properties of microwave sintered al-cu metal matrix composites
(
Association for Iron and Steel Technology, AISTECH
, 2016 , Conference Paper)
The present work focuses on the effect of copper (Cu) reinforcement on structural and mechanical properties of Al-Cu composites synthesized through microwave sintering approach. The pure aluminum (Al) and copper (Cu) powders ...
Using B4C nanoparticles to enhance thermal and mechanical response of aluminum
(
MDPI AG
, 2017 , Article)
In this work, Al-B4C nanocomposites were produced by microwave sintering and followed by hot extrusion processes. The influence of ceramic reinforcement (B4C) nanoparticles on the physical, microstructural, mechanical, and ...