عرض بسيط للتسجيلة

المؤلفDikobe, D.G.
المؤلفLuyt, A.S.
تاريخ الإتاحة2018-07-03T11:22:10Z
تاريخ النشر2017
اسم المنشورJournal of Composite Materials
المعرّفhttp://dx.doi.org/10.1177/0021998316668399
الاقتباسDG Dikobe and AS Luyt, Investigation of the morphology and properties of the polypropylene/low-density polyethylene/wood powder and the maleic anhydride grafted polypropylene/low-density polyethylene/wood powder polymer blend composites, Journal of Composite Materials , Vol 51, Issue 14, pp. 2045 – 2059, https://doi.org/10.1177/0021998316668399
الرقم المعياري الدولي للكتاب0021-9983
معرّف المصادر الموحدhttp://hdl.handle.net/10576/6790
الملخصThe properties of polypropylene/low-density polyethylene and maleic anhydride grafted polypropylene/low-density polyethylene blends, and their wood powder composites are compared in this study. The blends contained equal amounts of polymers, and the wood powder was added into the blends to form polypropylene/low-density polyethylene/wood powder and maleic anhydride grafted polypropylene/low-density polyethylene/wood powder ternary systems. The Fourier-transform infrared analysis of the blends and composites did not provide any evidence of significant interactions between the different components, although the rest of the results clearly showed that maleic anhydride grafted polypropylene and wood powder significantly interacted, and that there was some interaction between maleic anhydride grafted polypropylene and low-density polyethylene. The differential scanning calorimetry and dynamic mechanical analysis results confirmed the immiscibility of polypropylene and low-density polyethylene, and polypropylene and maleic anhydride grafted polypropylene, and indicated that wood powder was distributed in both the low-density polyethylene and polypropylene phases in the polypropylene/low-density polyethylene blend, but most probably only in the maleic anhydride grafted polypropylene phase in the maleic anhydride grafted polypropylene/low-density polyethylene blend. The polypropylene/low-density polyethylene and maleic anhydride grafted polypropylene/low-density polyethylene blends were found to be more thermally stable than the neat polymers, while the presence of wood powder in both polymer blends further increased the thermal stability of the polymers. The blends and composites with maleic anhydride grafted polypropylene showed higher tensile modulus values and lower elongation at break values than the composites with polypropylene, while the stress at break values of the two sets of samples were comparable.
اللغةen
الناشرSAGE Publications
الموضوعPolypropylene
low-density polyethylene
wood powder
blends
composites
العنوانMorphology and properties of the PP/LDPE/wood powder and the MAPP/LDPE/wood powder polymer blend composites.
النوعArticle
الصفحات2045 – 2059
رقم العدد14
رقم العدد14
رقم المجلد5
رقم المجلد51
ESSN1530-793X


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة