Center for Advanced Materials Research: Recent submissions
Now showing items 1-20 of 1289
-
Biolubricant Synthesis by Additization and Chemical Modification from Lipid-Rich Brackish Coelastrella sp. Using a Biorefinery Approach
( American Chemical Society , 2023 , Article)With a sizable market share and widespread use in automotive and industrial applications, biolubricants are produced from the oils of terrestrial plants that have undergone chemical modification or additive addition. ... -
Preparation and characterization of chemically synthesized polyaniline–polystyrene blends as a carbon dioxide gas sensor
( Elsevier , 2013 , Article)This correspondence presents a radically distinctive approach for preparing conducting polymer polyaniline–polystyrene (PANI–PS) blends doped with HCl by an in situ dispersion polymerization method. Generally, there are ... -
Influence of additives on recycled polymer blends
( Springer Nature , 2013 , Article)Polymer systems based on polymer waste offer promising way to increase recycling in the society. Since fillers play a major role in determining the properties and behavior of polymer composites, recycled polymers can also ... -
Polyaniline/polyvinyl alcohol blends: Effect of sulfonic acid dopants on microstructural, optical, thermal and electrical properties
( Elsevier , 2014 , Article)This correspondence reports the preparation and performance of different polyaniline–polyvinyl blends (PANI–PVA) doped with sulfonated acids. PANI is prepared by in situ dispersion polymerisation, and a subsequent extensive ... -
Reduced erbium-doped ceria nanoparticles: One nano-host applicable for simultaneous optical down- and up-conversions
( Springer Nature , 2014 , Article)This paper introduces a new synthesis procedure to form erbium-doped ceria nanoparticles (EDC NPs) that can act as an optical medium for both up-conversion and down-conversion in the same time. This synthesis process results ... -
Improved electrical conductivity of carbon/polyvinyl alcohol electrospun nanofibers
( Hindawi , 2015 , Article)Carbon nanofibers (CNFs) gained much interest in the last few years due to their promising electrical, chemical, and mechanical characteristics. This paper investigates a new nanocomposite composed of carbon nanofibers ... -
High performance sulfonic acid doped polyaniline–polystyrene blend ammonia gas sensors
( Springer Nature , 2016 , Article)In this work, we present a method of preparation and sensing measurement of four camphorsulfonic acid (CSA) doped polyaniline–polystyrene blends (PANI–PS), where PANI is obtained by dispersion polymerization and blending ... -
Enhancement of photovoltaic module performance by thermal management using shape-stabilized PCM composites
( Elsevier , 2024 , Article)Thermal management of photovoltaic (PV) panels is crucial due to the deterioration of their electrical efficiency at elevated operating temperatures. Therefore, thermal protection of PV against overheating is highly required. ... -
A Promising Electrochemical Sensor Platform for the Detection of Dopamine Using CuO-NiO/rGO Composite
( John Wiley and Sons Inc , 2023 , Article)Dopamine plays a significant role in the proper functioning of the central nervous system. Hence, the ability to sense levels of dopamine is pivotal in diagnosis and treatment procedures. For sensing dopamine, a mixed metal ... -
Electrochemical Nonenzymatic Acetone Sensing: A Novel Approach of Biosensor Platform Based on CNT/CuO Nanosystems
( John Wiley and Sons Inc , 2023 , Article)A promising approach for noninvasive medical diagnosis may be to measure the VOCs produced by metabolic changes or pathological disorders in human sweat, such as measuring the acetone levels in the presence of diabetes. ... -
Impact of a Sand Filtration Pretreatment Step on High-Loaded Greywater Treatment by an Electrocoagulation Technique
( Multidisciplinary Digital Publishing Institute (MDPI) , 2023 , Article)Greywater (GW) treatment by the electrocoagulation (EC) technique alone might not meet the required standards in terms of pollutant removal, specifically when GW contains high loads of pollutants. In this preliminary study, ... -
Integrating of electrocoagulation process with submerged membrane bioreactor for wastewater treatment under low voltage gradients
( Elsevier , 2023 , Article)Treating and reusing wastewater has become an essential aspect of water management worldwide. However, the increase in emerging pollutants such as polycyclic aromatic hydrocarbons (PAHs), which are presented in wastewater ... -
A comparison between iron and mild steel electrodes for the treatment of highly loaded grey water using an electrocoagulation technique
( Elsevier , 2023 , Article)In the last years, the electrocoagulation (EC) process has been widely used as a potential technique for grey water treatment. However, only a few studies have focused on treating highly loaded GW (HLGW) by EC. In this ... -
Investigating the potential of using solid waste generated from stone cutting factories for phenol removal from wastewater: A study of adsorption kinetics and isotherms
( Elsevier , 2023 , Article)Remarkably toxic, phenol requires efficient elimination from water. This study investigates the utilization of solid waste generated by stone-cutting factories for extracting phenol from wastewater. The solid waste underwent ... -
Correction: Pd/Ni-metal–organic framework-derived porous carbon nanosheets for efficient CO oxidation over a wide pH range
( Royal Society of Chemistry , 2022 , Article)The authors regret that one of the funders of this work was omitted in the Acknowledgements section of the original publication. The correct acknowledgements are as follows: This work was supported by the Qatar University ... -
Interfacial Electronic Interactions within the Pd-CeO2/Carbon Onions Define the Efficient Electrocatalytic Ethanol Oxidation Reaction in Alkaline Electrolytes
( American Chemical Society (ACS) , 2024 , Article)Porous Pd-based electrocatalysts are promising materials for alkaline direct ethanol fuel cells (ADEFCs) and ethanol sensors in the development of renewable energy and point-of-contact ethanol sensor test kits for drunk ... -
Porous transition metal-based nanostructures as efficient cathodes for aluminium-air batteries
( Elsevier , 2023 , Article)Aluminum-air batteries (AABs) are green and efficient energy systems due to their earth-abundant, safety, low price, excellent theoretical capacity (2.98 Ah/g) and energy density (8.1 Wh/g), which are significant merits ... -
Ternary PdNiO nanocrystals-ornamented porous CeO2/onion-like carbon for electrooxidation of carbon monoxide: unveiling the effect of supports and electrolytes
( Royal Society of Chemistry , 2023 , Article)Porous ternary Pd-based catalysts are highly promising for various electrocatalytic applications, due to their low Pd mass, high surface area, accessible active sites, and tunable electronic structure; however, their ... -
Graphene-based catalysts for carbon monoxide oxidation: Experimental and theoretical insights
( Elsevier , 2023 , Article)Graphene-based catalysts are important in various applications ranging from hydrogen production to fuel cells and gas conversion reactions, due to their high surface area, low density, great mechanical properties, and rich ... -
Unveiling the effect of shapes and electrolytes on the electrocatalytic ethanol oxidation activity of self-standing Pd nanostructures
( Elsevier , 2023 , Article)Morphologically controlled Pd-based nanocrystals are the most efficient strategies for improving the electrocatalytic ethanol oxidation reaction (EOR) performance; however, their morphological-EOR activity relationship and ...