Browsing by Author "Bhadra, J."
Now showing items 1-16 of 16
-
A BHJ-thin-film/liquid-electrolyte based electrochemical-sensor for visible light-detection
Shikoh A.S.; Ahmad Z.; Touati F.; Shakoor R.A.; Bhadra J.; Al-Thani N.J.... more authors ... less authors ( Royal Society of Chemistry , 2017 , Article)The current study presents a new type of inexpensive and very sensitive bulk heterojunction (BHJ) organic photo-sensor (OPS) configuration that incorporates a layer of liquid electrolyte into the conventional BHJ photodiode ... -
Consequence of aging at Au/HTM/perovskite interface in triple cation 3D and 2D/3D hybrid perovskite solar cells
Ahmad Z.; Mishra A.; Abdulrahim S.M.; Taguchi D.; Sanghyun P.; Aziz F.; Iwamoto M.; Manaka T.; Bhadra J.; Al-Thani N.J.; Nazeeruddin M.K.; Touati F.; Belaidi A.; Al-Muhtaseb S.A.... more authors ... less authors ( Nature Research , 2021 , Article)Perovskite solar cells (PSCs) expressed great potentials for offering a feasible alternative to conventional photovoltaic technologies. 2D/3D hybrid PSCs, where a 2D capping layer is used over the 3D film to avoid the ... -
Degradation analysis in mixed (MAPbI3 and MAPbBr3) perovskite solar cells under thermal stress
Ahmad, Zubair; Shikoh , Ali Sehpar; Paek , Sanghyun; Nazeeruddin , M. K.; Al-Muhtaseb, Shaheen A.; Touati, Farid; Bhadra , J.; Al-Thani, Noora J.... more authors ... less authors ( Springer New York LLC , 2019 , Article)The current study provides an insight into the thermal stability of perovskite solar cells (PSCs) and the factors causing their degradation. To this end, a systematic stability study was carried out on n-i-p type perovskite ... -
Development of a piezoelectric nanogenerator based on mesoporous silica/zinc oxide hybrid nanocomposite fibres
Bhadra J.; Ponnamma D.; Alkareem A.; Parangusan H.; Ahmad Z.; Al-Thani N.; Daifalla A.K.E.; Al-Sanari N.A.; Mohamed R.... more authors ... less authors ( John Wiley and Sons Ltd , 2022 , Article)The current research paper presents an investigation of the piezoelectric performances of five different polyvinylidene fluoride hexafluoropropylene (PHP) systems fabricated by electrospinning. Morphological and structural ... -
Effect of humidity on the electrical properties of the silver polyaniline/polyvinyl alcohol nanocomposites
Bhadra J.; Popelka A.; Abdulkareem A.; Lehocky M.; Humpolicek P.; Al-Thani N.... more authors ... less authors ( Elsevier B.V. , 2019 , Article)Polymer-metal nanocomposites with enhanced mechanical, optical, electrical, dielectric, and antimicrobial properties are currently in high demand for many industrial applications. Here, we study and present the effect of ... -
Effect of illumination and applied potential on the electrochemical impedance spectra in triple cation (FA/MA/Cs) 3D and 2D/3D perovskite solar cells
Abdulrahim, Sumayya M.; Ahmad, Zubair; Mehmood, Muhammad Qasim; Paek, Sanghyun; Bhadra, J.; Al-Thani, Noora J.; Nazeeruddin, Mohammad Khaja; Belaidi, Abdelhak; Amani, Mahmood... more authors ... less authors ( Elsevier , 2021 , Article)Even though there has been numerous works performed based on electrochemical impedance spectroscopy (EIS) of perovskite solar cells (PSCs), however, many aspects of the obtained EI spectra are yet to be fully grasped. ... -
Effect of sulfonated poly (ether ether ketone) on the sensitivity of polyvinylidene fluoride-based resistive humidity sensors
Mallick S.; Ahmad Z.; Eribi A.; Parangusan H.; Bhadra J.; Hassan M.K.; Al-Thani N.J.; Touati F.; Al-Muhtaseb S.... more authors ... less authors ( Elsevier Ltd , 2020 , Article)We have investigated the effect of sulfonated poly (ether ether ketone) (SPEEK) on the thermal stability, hydrophilicity, and sensitivity of polyvinylidene fluoride (PVDF) films based resistive humidity sensors. The blended ... -
Effects of aniline concentrations on the electrical and mechanical properties of polyaniline polyvinyl alcohol blends
Bhadra, J.; Al-Thani, N.J.; Madi, N.K.; Al-Maadeed, M.A. ( Elsevier , 2015 , Article)Abstract In this work, we present an exclusive study on the effect of the feeding ratio of the monomer (aniline) on the structural, thermal, mechanical and electrical properties of polyaniline (PANI) polyvinyl alcohol (PVA) ... -
Enhancement of thermoelectric properties of low-toxic and earth-abundant copper selenide thermoelectric material by microwave annealing
Jaldurgam F.F.; Ahmad Z.; Touati F.; Ashraf A.A.; Shakoor A.; Bhadra J.; Al-Thani N.J.; Altahtamouni T.... more authors ... less authors ( Elsevier Ltd , 2022 , Article)Our current work aims to enhance the thermoelectric properties of p-type copper selenide (Cu2Se), a low toxic, earth-abundant intermediate material for thermoelectric applications by a low-cost, simple and fast microwave-assisted ... -
Humidity sensor based on poly(lactic acid)/PANI-ZnO composite electrospun fibers
Parangusan, Hemalatha; Bhadra, Jolly; Ahmad, Zubair; Mallick, Shoaib; Touati, Farid; Al-Thani, Noora... more authors ... less authors ( Royal Society of Chemistry , 2021 , Article)The electrospinning technique has been successfully used to prepared micro-fibers of the poly(lactic acid)/polyaniline–zinc oxide (PLA/PANI–ZnO) composite. The polyaniline–zinc oxide (PANI–ZnO) nanocomposites are synthesized ... -
Investigation of the structural, optical and gas sensing properties of PANI coated Cu-ZnS microsphere composite
Parangusan H.; Bhadra J.; Ahmad Z.; Mallick S.; Touati F.; Al-Thani N.... more authors ... less authors ( Royal Society of Chemistry , 2020 , Article)Polyaniline (PANI)/Cu-ZnS composites with porous microspheres are prepared by a hydrothermal and in situ polymerization method. The structural, optical, and morphological properties are characterized by X-ray powder ... -
Photo-reduced route of polyaniline nanofiber synthesis with embedded silver nanoparticles
Bhadra J.; Al-Thani N.J.; Karmakar S.; Madi N.K. ( Elsevier B.V. , 2019 , Article)This work presents a method on the preparation and performance of four silver (Ag) concentrations in polyaniline (PANI) and polyvinyl alcohol (PVA) nanocomposite blend (PNPAg). The synthesis of Ag nanoparticles is first ... -
PLA-TiO2 nanocomposites: Thermal, morphological, structural, and humidity sensing properties
Mallick S.; Ahmad Z.; Touati F.; Bhadra J.; Shakoor R.A.; Al-Thani N.J.... more authors ... less authors ( Elsevier Ltd , 2018 , Article)In this paper, the effect of TiO2 ceramic nanoparticles on the thermal stability, morphology, molecular mass, structure and electrical properties of the polylactic acid-Titanium dioxide (PLA-TiO2) composites, aimed for ... -
Polyaniline/Polystyrene Blends: In-Depth Analysis of the Effect of Sulfonic Acid Dopant Concentration on AC Conductivity Using Broadband Dielectric Spectroscopy
Al-Thani N.; Hassan M.K.; Bhadra J. ( Hindawi Limited , 2018 , Article)This work presents an in-depth analysis of the alternating current (AC) conductivity of polyaniline-polystyrene (PANI-PS) blends doped with camphor sulfonic acid (CSA) and prepared using an in situ dispersion polymerization ... -
Positron annihilation study on polyaniline nanocomposite used for Pb(II) ion removal
Al-Thani, N.J.; Bhadra, J.; Abdulmalik, D.; Al-Qaradawi, I.; Alashraf, A.; Madi, N.K.... more authors ... less authors ( Taylor & Francis , 2016 , Article)Nanocomposites of polyaniline (PANI) with three different concentrations of micrometre-sized sawdust are prepared in aqueous media via chemical casting method at room temperature. Thereafter, the removal efficiency of the ... -
The effect of electro spinning parameters on polystyrene nano fiber morphology: Oil-water separation
Bhadra J.; Al-Thani N.J.; Abdulkareem A. ( Desalination Publications , 2018 , Article)This manuscript reports optimized conditions necessary to prepare electro-spun nano fibers and microfibers using two different forms of polystyrene (PS) in dimethylformamide (DMF). We conducted a systematic and methodical ...