Browsing by Author "Hassan, Mohammad K. ()"
Now showing items 1-20 of 61
-
2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers with enhanced mechanical and electrical properties
( Public Library of Science , 2017 , Article)Novel 2D Ti3C2Tx (MXene)-reinforced polyvinyl alcohol (PVA) nanofibers have been successfully fabricated by an electrospinning technique. The high aspect ratio, hydrophilic surfaces, and metallic conductivity of delaminated ... -
A hybrid nf-fo-ro process for the supply of irrigation water from treated wastewater: Simulation study
( MDPI AG , 2021 , Article)Municipal treated wastewater could be considered as a water source for food crop irrigation purposes. Enhancing the quality of treated wastewater to meet irrigation standards has become a necessary practice. Nanofiltration ... -
A precious-metal-free Fe-intercalated carbon nitride porous-network with enhanced activity for the oxygen reduction reaction and methanol-tolerant oxygen reduction reaction
( Royal Society of Chemistry , 2020 , Article)The economical cost of the catalyst material has remained a challenging task in traditional fuel cells (FCs) and in direct methanol fuel cells (DMFCs). However, replacement of noble metals with precious metal-free materials ... -
A review on recent advances in CO2 separation using zeolite and zeolite-like materials as adsorbents and fillers in mixed matrix membranes (MMMs)
( Elsevier , 2021 , Article)Anthropogenic emissions have developed the environmental demands for proficient carbon dioxide (CO2) separation technologies. Adsorption and membrane technologies are widely used to separate CO2 from other light gases due ... -
A stable porous vessel for photocatalytic degradation of Azocarmine G dye
( Elsevier , 2022 , Article)Porous nanocomposite of polystyrene (PS) is fabricated by non-solvent induced phase separation, and with the addition of ZnO nanomaterials through electrospinning, the different evaporation rates of solvent/non solvent ... -
A versatile route for the fabrication of micro-patterned polylactic-acid (PLA)-based membranes with tailored morphology via breath figure imprinting
( Royal Society of Chemistry , 2024 , Article)Breath figure imprinting, based on surface instabilities combined with fast polymer evaporation in a humid environment, enables the creation of micro-patterned membranes with tailored pore sizes. Despite being a simple ... -
Advanced Block Copolymer Membranes for Oily Industrial Wastewater Treatment
( Qatar University Press , 2023 , Conference)Tremendous amounts of oily wastewater are produced daily from industrial processes, including petrochemical, textile, leather, and steel processing. This wastewater is a huge challenge to the environment and industry uses ... -
Advances in fabrication techniques and performance optimization of polymer membranes for enhanced industrial oil-water separation: A critical review
( Elsevier , 2024 , Article Review)Among oil-water separation technologies, membrane processes are increasingly being recognized in terms of cost-effectiveness and simplicity, offering advantages like easy handling, energy efficiency, and small footprints ... -
Advances in functionalization and conjugation mechanisms of dendrimers with iron oxide magnetic nanoparticles
( Royal Society of Chemistry , 2024 , Article Review)Iron oxide magnetic nanoparticles (MNPs) are crucial in various areas due to their unique magnetic properties. However, their practical use is often limited by instability and aggregation in aqueous solutions. This review ... -
Anticorrosion Properties of Robust and UV-Durable Poly(vinylidene fluoride-co-hexafluoropropylene)/Carbon Nanotubes Superhydrophobic Coating
( American Chemical Society (ACS) , 2024 , Article)Aluminum is vulnerable to corrosion, biofouling, and durability reduction as a result of forming unwanted deposits during their interactions with liquids. In this work, a high-corrosion-resistance superhydrophobic coating ... -
Behavior of artificially corroded RC beams strengthened with CFRP and hybrid CFRP-GFRP laminates
( Elsevier , 2022 , Article)Steel corrosion is a major degradation factor for the reinforced concrete (RC) infrastructure and necessitates a costly repair after short service life. Predicting the strength of corroded and retrofitted structural elements ... -
Biomimetic 3D Prototyping of Hierarchically Porous Multilayered Membranes for Enhanced Oil-Water Filtration
( American Chemical Society , 2025 , Article)This study introduces a biomimetic approach to 3D printing multilayered hierarchical porous membranes (MHMs) using Direct Ink Writing (DIW) technology. Fabricated through a fast layer-by-layer printing process with varying ... -
Carbon Fiber-Reinforced Thermoplastic Composite Coatings for Steel Pipelines
( Multidisciplinary Digital Publishing Institute (MDPI) , 2024 , Article)Steel pipeline systems carry about three-quarters of the world’s oil and gas. Such pipelines need to be coated to prevent corrosion and erosion. An alternative to the current epoxy-based coating, a multi-layered composite ... -
Coaxial Layered Fiber Spinning for Wind Turbine Blade Recycling
( American Chemical Society , 2024 , Article)Plastics' long degradation time and their role in adding millions of metric tons of plastic waste to our oceans annually present an acute environmental challenge. Handling end-of-life waste from wind turbine blades (WTBs) ... -
Comparison of nanofiltration with reverse osmosis in reclaiming tertiary treated municipal wastewater for irrigation purposes
( MDPI AG , 2021 , Article)This study compares the performance of nanofiltration (NF) and reverse osmosis (RO) for the reclamation of ultrafiltered municipal wastewater for irrigation of food crops. RO and NF technologies were evaluated at different ... -
Continuous Nanoparticle Patterning Strategy in Layer-Structured Nanocomposite Fibers
( John Wiley and Sons Inc , 2022 , Article)Anisotropic polymer/nanoparticle composites display unique mechanical, thermal, electrical, and optical properties depending on confirmation and configuration control of the composing elements. Processes, such as vapor ... -
Controlling polydopamine deposition morphology on the surface of poly(vinylidene fluoride) microfiltration membranes for improved oil-water filtration performance
( Elsevier , 2024 , Article)Herein, we studied the effect of adding into water-dopamine mixture a small amount of the fourth generation of bis-MPA based Boltorn™ hyperbranched polyol polyester (H40) or inorganic nanolayered compound MXene on the ... -
Corrosion and heat treatment study of electroless nip-ti nanocomposite coatings deposited on hsla steel
( MDPI AG , 2020 , Article)Corrosion and heat treatment studies are essential to predict the performance and sustainability of the coatings in harsh environments, such as the oil and gas industries. In this study, nickel phosphorus (NiP)–titanium ... -
Cytotoxicity and Antibiofilm Activity of Silver-Polypropylene Nanocomposites
( MDPI , 2023 , Article)The development of biocompatible nanomaterials that interface with human skin and tissue is critical for advancing prosthetics and other therapeutic medical needs. In this perspective, the development of nanoparticles with ... -
Developing sustainable draw solute for forward osmosis process using poly(amidoamine) dendrimer coated magnetic nanoparticles
( Elsevier B.V. , 2023 , Article)Forward osmosis is the least energy intensive water treatment membrane process, however, designing a sustainable draw solute is still a critical research necessity. In this work, we developed Poly(amidoamine) dendrimer ...
