Show simple item record

AuthorKhan M.I.
AuthorKhraisheh M.
AuthorAlmomani F.
Available date2020-04-05T10:53:23Z
Publication Date2019
Publication NameScience of the Total Environment
ISSN489697
URIhttp://dx.doi.org/10.1016/j.scitotenv.2019.05.481
URIhttp://hdl.handle.net/10576/13840
AbstractIn the present work, the fabrication of pyridinium functionalized anion exchange membranes (AEMs) for acid recovery using diffusion dialysis (DD) processes was developed using brominated poly (2,6-dimethyl-1,4-phenylene oxide) (BPPO) as a polymer backbone and 4-methylpyridine (MP) as an ion exchange element. The electrochemical and physiochemical properties of the developed AEMs were tested under various concentration of MP into the polymer matrix. Water uptake (WR) of 17.18% to 30.55%, ion exchange capacity (IEC) of 1.94–2.24 mmol/g and linear swelling ratio (LSR) of 6.87–14.89% were obtained. In addition, the new membranes exhibited dense morphology, higher thermal and chemical stability in addition to dimensional and mechanical sturdiness. Acid dialysis coefficient (UH) in the range of 0.011–0.066 m/h was obtained. In addition the developed AEMs had a separation factor (S) in range of 24.87–77.61 resulting in enhanced DD performance compared to commercial membrane DF-120B under comparable experimental conditions. The new prepared membranes showed potential for successful application in acid recovery via diffusion dialysis.
SponsorThe research work is supported by CAS-TWAS President's fellowship award for Ph.D.
Languageen
PublisherElsevier B.V.
SubjectAnion exchange membrane
SubjectDiffusion dialysis, acid recovery
SubjectPyridinium
TitleFabrication and characterization of pyridinium functionalized anion exchange membranes for acid recovery
TypeArticle
Pagination90-96
Volume Number686


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record