Show simple item record

AuthorKarina, Berner
AuthorCockcroft, John
AuthorMorris, Linzette D.
AuthorLouw, Quinette
Available date2020-10-15T06:08:42Z
Publication Date2020-10-31
Publication NameJournal of Bodywork and Movement Therapies
Identifierhttp://dx.doi.org/10.1016/j.jbmt.2020.06.008
CitationBerner, K., Cockcroft, J., Morris, L. D., & Louw, Q. (2020). Concurrent validity and within-session reliability of gait kinematics measured using an inertial motion capture system with repeated calibration. Journal of Bodywork and Movement Therapies, 24(4), 251-260.
ISSN13608592
URIhttps://www.sciencedirect.com/science/article/pii/S1360859220300875
URIhttp://hdl.handle.net/10576/16454
AbstractIntroductionWearable inertial measurement units (IMUs) enable gait analysis in the clinic, but require calibrations that may affect subsequent gait measurements. This study assessed concurrent validity and within-session reliability of gait kinematics measured by a frequently calibrated IMU-based system. Calibration pose accuracy and intra-rater repeatability, and IMU orientation tracking accuracy, were additionally quantified. MethodsCalibration poses and gait were recorded in 15 women using IMUs and optical motion capture (OMC) (reference standard) simultaneously. Participants performed six consecutive trials: each comprising a calibration pose and a walk. IMU tracking was assessed separately (once-off) using technical static and dynamic tests. Differences of > 5° constituted clinical significance. ResultsConcurrent validity for gait revealed clinically significant between-system differences for sagittal angles (root-mean-square error [RMSE] 6.7°–15.0°; bias −9.3°–3.0°) and hip rotation (RMSE 7.9°; bias −4.2°). After removing modelling offsets, differences for all angles (except hip rotation) were < 5°. Gait curves correlated highly between systems (r > 0.8), except hip rotation, pelvic tilt and -obliquity. Within-session reliability of IMU-measured gait angles was clinically acceptable (standard error of measurement [SEM] < 5°). Calibration poses were repeatable (SEM 0.3°–2.2°). Pose accuracy revealed mean absolute differences (MAD) < 5° for all angles except sagittal ankle, hip and pelvis. IMU tracking accuracy demonstrated RMSE ≤ 2.0°. ConclusionA frequently calibrated IMU system provides reliable gait measurements; comparing highly to OMC after removing modelling differences. Calibration poses can be implemented accurately for most angles and consistently. IMU-measured gait data are clinically useful and comparable within participants, but should not be compared to OMC-measured data.
Languageen
PublisherElsevier
SubjectAccuracy
Repeatability
Inertial measurement unit
Gait kinematics
Single-pose calibration
Reference pose
Biomechanics
TitleConcurrent validity and within-session reliability of gait kinematics measured using an inertial motion capture system with repeated calibration
TypeArticle
Issue Number4
Volume Number24
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record