Catalytic decomposition of ethanol over bimetallic NiCo catalysts for carbon nanotube synthesis
المؤلف | Kumar, Anand |
المؤلف | Ashok, Anchu |
تاريخ الإتاحة | 2020-10-22T06:59:11Z |
تاريخ النشر | 2020 |
اسم المنشور | Qatar University Annual Research Forum & Exhibition 2020 |
الاقتباس | Kumar A., Ashok A., "Catalytic decomposition of ethanol over bimetallic NiCo catalysts for carbon nanotube synthesis", Qatar University Annual Research Forum and Exhibition (QUARFE 2020), Doha, 2020, https://doi.org/10.29117/quarfe.2020.0039 |
الملخص | In this work we investigate the use of NiCo bimetal/oxide as catalyst for hydrogen production from ethanol, with a focus on the deactivation pattern and the nature of the observed carbon deposition [1, 2]. It is well known that sintering and coke deposition during decomposition reaction significantly reduces the activity of the catalysts at higher temperature, by blocking the active sites of the catalysts. During ethanol decomposition reaction, the cleavage of C-C bond produces adsorbed *CH4 and *CO species that further decompose to form carbonaceous compounds [3]. FTIR in-situ analysis was conducted between 50 to 400°C for all the catalysts to understand the reaction mechanism and product selectivity. Cobalt was found to be selective for aldehyde and acetate, whereas bimetallic Ni-Co was selective for the formation of CO at 400°C along with aldehyde. Complete conversion of ethanol was observed at 350°C and 420°C for NiCo and Cobalt respectively indicating an improvement in the rate of conversion when Ni was added to cobalt. The crystallinity, morphology and particle analysis of the used catalyst after reaction were studied using XRD, SEM and TEM respectively. The XRD shows the complete phase change of porous NiCoO2 to NiCo alloy and SEM indicates the presence of fibrous structure on the surface with 91.7 % of carbon while keeping 1:1 ratio of Ni and Co after the reaction. The detailed analysis of carbon structure using HRTEM-STEM shows the simultaneous growth of carbon nano fibers (CNFs) and multiwalled carbon nanotubes (MWCNTs) that were favored on larger and smaller crystallites respectively. Analysis of carbon formation on individual Co catalyst and bimetallic NiCo catalyst shows a clear difference in the initiation patter of carbon deposition. Metallic Co nanopartiles was found to be more mobile where Co disperses along the catalysts surface, whereas NiCo nanoparticles were relatively less mobile, and maintained their structure. |
اللغة | en |
الناشر | Qatar University Press |
الموضوع | Carbon nanotubes Ethanol decomposition Catalyst deactivation Bimetallic catalysts. |
النوع | Poster |
الملفات في هذه التسجيلة
هذه التسجيلة تظهر في المجموعات التالية
-
Theme 1: Energy, Environment & Resource Sustainability [108 items ]