Search
Now showing items 21-30 of 43
Design and development of novel computer vision-based automatic calibration system for analog dial pressure gauge
(
American Society for Testing and Materials
, 2022 , Article)
Pressure gauge calibration refers to comparing the standard and test gauge to determine the error percentage. The reading accuracy of the analog dial pressure gauge is found in the conventional method through manual ...
A review on high performance photovoltaic cells and strategies for improving their efficiency
(
Springer Nature
, 2022 , Article)
The introduction of a practical solar cell by Bell Laboratory, which had an efficiency of approximately 6%, signified photovoltaic technology as a potentially viable energy source. Continuous efforts have been made to ...
Emerging trends in niobium, vanadium, and molybdenum based MXenes applications
(
Taylor & Francis
, 2022 , Article)
MXenes, 2-dimensional (2D) layered materials, have been able to garner immense popularity among researchers and academia alike in recent times. MXenes are typically produced from the selective etching of “A” group metal ...
A Family of 2D-MXenes: Synthesis, Properties, and Gas Sensing Applications
(
American Chemical Society
, 2022 , Article)
Gas sensors, capable of detecting and monitoring trace amounts of gas molecules or volatile organic compounds (VOCs), are in great demand for numerous applications including diagnosing diseases through breath analysis, ...
Machine learning driven intelligent and self adaptive system for traffic management in smart cities
(
Springer Nature
, 2022 , Article)
Traffic congestion is becoming a serious problem with the large number of vehicle on the roads. In the traditional traffic control system, the timing of the green light is adjusted regardless of the average traffic rate ...
A comparative assessment on life cycle analysis of the biodiesel fuels produced from soybean, Jatropha, Calophyllum inophyllum, and microalgae
(
Uppalapati, S., Jani, S. P., Khan, M. B. A., Alagarsamy, M., Manoharan, M., Panchal, H., & Sadasivuni, K. K. (2022). A comparative assessment on life cycle analysis of the biodiesel fuels produced from soybean, Jatropha, Calophyllum inophyllum, and microalgae. Energy Sources, Part A: Recovery, Utilization, and Environmental Effects, 44(2), 3253-3272.
, 2022 , Article)
There is a continuous depletion of fossil resources recorded in 20th century for the production of diesel that resulted in significant climatic change. The current study focuses on the challenges faced due to energy crisis ...
Facile fabrication of CuO nanoparticles via microwave-assisted method: photocatalytic, antimicrobial and anticancer enhancing performance
(
Taylor & Francis
, 2022 , Article)
In this current research, biogenic Copper oxide (CuO) nanoparticles were successfully produced by the green method, i.e. microwave-assisted process using Andrographis paniculata as a source. Microwave-assisted biogenic CuO ...
Understanding the mechanics of complex topology of the 3D printed Anthill architecture
(
Oxford University Press
, 2022 , Article)
The present work aimed to investigate the deformation behavior of complex ant mound architectures under compression. We have used the cement casting method to extract four different ant nest morphologies. These casted ...
Fiber Bragg Gratings based smart insole to measure plantar pressure and temperature
(
Elsevier
, 2022 , Article)
Various foot complications can be easily avoided by continuously monitoring plantar (foot sole) pressure and temperature at home. Systems which can simultaneously measure plantar pressure and temperature in real time are ...
An Improved Quality Inspection of Engine Bearings Using Machine Vision Systems
(
American Society for Testing and Materials
, 2022 , Article)
The growth of an industry is mostly based on the quality of the product. When there is a fault in the manufactured product in a batch, the entire batch is rejected because of a single faulty product. Quality has become one ...