بحث بسيط
السجلات المعروضة 11 -- 20 من 35
Editorial: Using thermogravimetric analysis to determine polymer thermal stability: Relevance of changes in onset temperature of mass loss
(
Budapest University of Technology
, 2015 , Article)
Editorial
A review on electrospun bio-based polymers for water treatment
(
Budapest University of Technology
, 2015 , Article)
Over the past decades, electrospinning of biopolymers down to nanoscale garnered much interest to address most of the millennia issues related to water treatment. The fabrication of these nanostructured membranes added a ...
Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
(
Springer
, 2015 , Article)
The morphology, thermal stability and thermal degradation kinetics of melt-mixed poly(hydroxybutyrateco-valerate) (PHBV)/poly(e-caprolactone) (PCL) blends filled with small amounts of titanium(IV)oxide (TiO2) nanoparticles ...
Dynamic mechanical properties of PLA/PHBV, PLA/PCL, PHBV/PCL blends and their nanocomposites with TiO2 as nanofiller
(
Elsevier
, 2015 , Article)
The effect of blending and the addition of small amounts of TiO2 nanoparticles on the dynamic mechanical properties of PLA/PHBV, PLA/PCL and PHBV/PCL blends is reported in this paper. The storage modulus of the PLA/PHBV ...
Effect of surfactant and radiation treatment on the morphology and properties of PP/EG composites
(
Springer
, 2015 , Article)
The effects of surfactant and electron beam (EB) radiation treatment on the morphology and properties of polypropylene (PP)/expanded graphite (EG) composites were investigated. Surfactant treatment and sonication of
EG ...
Prediction of the mechanical properties of copper powder-filled low-density polyethylene composites. A comparison between the ANN and theoretical models
(
Begell House
, 2015 , Article)
In the present study, the mechanical properties of copper (Cu) powder-filled low-density polyethylene
(LDPE) composites are predicted by using artificial neural networks (ANNs) as a function of
the filler concentration. ...
Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
(
Springer
, 2016 , Article)
This paper reports on the morphologies of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites prepared by melt compounding with various MCM-41 contents in the range of 0.1–5 wt%, the interactions between ...
Influence of blending and blend morphology on the thermal properties and crystallization behaviour of PLA and PCL in PLA/PCL blends
(
Springer
, 2016 , Article)
In this paper, we reported on the influence of PCL on the cold crystallization behaviour of PLA in different PLA/PCL blends, and on the influence of blending with PLA on the PCL crystallization behaviour and kinetics. The ...
Morphology and properties of the PP/LDPE/wood powder and the MAPP/LDPE/wood powder polymer blend composites.
(
SAGE Publications
, 2017 , Article)
The properties of polypropylene/low-density polyethylene and maleic anhydride grafted polypropylene/low-density polyethylene blends, and their wood powder composites are compared in this study. The blends contained equal ...
Thermomechanical properties and thermal degradation kinetics of poly(methyl methacrylate) (PMMA) and polycarbonate (PC) filled with cerium doped yttrium aluminium garnet (Ce:YAG) prepared by melt compounding.
(
Springer Verlag
, 2017 , Article)
This paper reports on the thermomechanical properties and thermal
degradation kinetics of poly(methyl methacrylate) (PMMA) and polycarbonate (PC)
composites filled with cerium-doped yttrium aluminium garnet (Ce:YAG) at ...