Search
Now showing items 21-30 of 35
A Zeta-converter based four-switch three-phase DC-AC inverter
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Minimizing the number of active switching devices in switched-mode power-electronic systems has a significant importance. Reduced complexity and switching losses, low cost, weight, and volume and high reliability are the ...
A cascaded boost inverter-based open-end winding three-phase induction motor drive for photovoltaic-powered pumping applications
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Although PWM inverter-fed drives are now a well-established technology in industrial applications, the generation of common mode voltage associated with these modulation techniques results in undesired bearing current and ...
The transition arm multilevel converter - A concept for medium and high voltage DC-DC transformers
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
This paper proposes a dc/ac converter topology where each phase leg comprises a conventional series switch valve in one arm and a series connection of half-bridge chopper cells in the other arm. Operation with trapezoidal ...
A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
Due to the large variety of renewable power sources, power electronics play an important role in energy conversion. Different power converter topologies are used to interface distributed power generation systems (DPGS) ...
A single-stage three-phase inverter based on cuk converters for PV applications
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
This paper presents a new three-phase inverter based on the Cuk converter. The main feature of the proposed topology is that the energy storage elements, such as inductors and capacitors, can be reduced in order to improve ...
An LCL filter-based grid-interfaced three-phase voltage source inverter: Performance evaluation and stability analysis
(
Institution of Engineering and Technology
, 2014 , Conference Paper)
Power converters in grid connection applications commonly employ Sinusoidal Pulse-Width Modulation (SPWM) technique. Passive filters are employed in order to attenuate the generated switching current ripples and reduces ...
A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap ...
Elimination of reverse recovery effects associated with CoolMOS devices employing current source inverter topology
(
IET
, 2012 , Conference Paper)
MOSFET transistors are continuously being an essential part of power electronic converters due to their low switching losses at high switching frequencies. However, the traditional power MOSFET suffers from a relatively ...
Voltage sensorless current control of low power inverter-based distributed generation systems
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
The control of power electronic converters is subjected to several challenges as measurement sensors drift, malfunction in harsh environments, non-ideal grid, and performance degradation due to the delay of discrete control ...
A new five-phase to three-phase back-to-back current source converter based wind energy conversion system
(
IEEE
, 2013 , Conference Paper)
Wind energy is one of the fastest growing renewable energy sources. The increased penetration of wind power into the utility grid brings challenges such as voltage and frequency fluctuations, generator torque ripples, and ...