بحث بسيط
السجلات المعروضة 1 -- 10 من 33
Synthesis and properties of HA/ZnO/CNT nanocomposite
(
Elsevier Ltd
, 2018 , Article)
The goal of this study was to examine the tribomechanical properties of hydroxyapatite (HA)/ZnO and HA/ZnO/CNT composite ceramics (carbon nanotubes; with different ratios 0.5 wt%, 1.0 wt%, and 1.5 wt%). The composites were ...
The mechanical and adhesive properties of electrically and thermally conductive polymeric composites based on high density polyethylene filled with nickel powder
(
Elsevier, Ltd
, 2013 , Article)
Electrically and thermally conductive composites made using high density polyethylene (HDPE) matrix blended with a special grade of branch-structured nickel particles were studied. Composites with high filler content were ...
Differentiating the mechanical response of hierarchical magnesium nano-composites as a function of temperature
(
Elsevier, Ltd
, 2012 , Article)
The effect of temperature change on quasi-static mechanical response of monolithic Mg alongside hierarchical Mg/Al–Al2O3 nano-composites synthesized through powder metallurgy route followed by microwave assisted rapid ...
Mechanical and thermal properties of date palm leaf fiber reinforced recycled poly (ethylene terephthalate) composites
(
Elsevier, Ltd
, 2013 , Article)
Development of a recycled poly (ethylene terephthalate) (PETr) reinforced with surface treated date palm leaf fiber (DPLF) composites with enhanced mechanical properties have been studied. Surface modified date palm leaf ...
Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials
(
Elsevier Ltd
, 2014 , Article)
Thermal and mechanical properties of blends based on high density polyethylene and paraffin wax were investigated. The blends were prepared from 5 to 50vol. % of paraffin wax employing a twin-screw extruder. Thermal behaviour ...
Processing, characterization and modeling of recycled polypropylene/glass fibre/wood flour composites
(
Elsevier Ltd
, 2014 , Article)
Polypropylene (PP) is one of the most common thermoplastic materials in the world. There is a need to recycle the large amount of this used material. To overcome the environmental problems, related to the polymer waste, ...
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
(
Elsevier, Ltd
, 2014 , Article)
Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ...
Tailoring of the thermal, mechanical and dielectric properties of the polypropylene foams using gamma-irradiation
(
Elsevier Ltd
, 2016 , Article)
This study investigate the influence of gamma-irradiation (GI) doses from 0 up to 50 kGy on the polypropylene (PP) foams, mainly the impact on their structural and physical properties. It was found that structural properties ...
High strength, ductility, and electrical conductivity of in-situ consolidated nanocrystalline Cu-1%Nb
(
Elsevier Ltd
, 2018 , Article)
Nanocrystalline metals—with grain sizes less than 100 nm— have strengths exceeding those of coarse-grained and even alloyed metals [1], [2]. A bulk nanocrystalline Cu-1%Nb alloy was synthesized by an in-situ consolidation ...
The effects of gas tungsten arch welding on the corrosion and mechanical properties of AA 6061 T6
(2013 , Article)
Corrosion of welded and un-welded Aluminum Alloy 6061 T6 was investigated by immersing specimens in 3.5% (wt) NaCl solution. Potentiodynamic and open circuit potential measurements were conducted. The mechanical properties ...