Search
Now showing items 1-10 of 16
A Six-Phase 24-Slot/10-Pole Permanent-Magnet Machine with Low Space Harmonics for Electric Vehicle Applications
(
Institute of Electrical and Electronics Engineers Inc.
, 2016 , Article)
This paper proposes a six-phase surface-mounted permanent-magnet machine with a 24-slot/10-pole fractional slot winding, which not only eliminates the air-gap flux subharmonics, but also minimizes the effect of slot ...
Application of stator shifting to five-phase fractional-slot concentrated winding interior permanent magnet synchronous machine
(
Institution of Engineering and Technology
, 2016 , Article)
In many applications, interior permanent magnet synchronous machines (IPMSMs) with fractional slot concentrated windings (FSCWs) are considered promising candidates in terms of higher power density and efficiency. In ...
Performance of a five-phase boost inverter-fed submersible induction machine
(2013 , Conference Paper)
An electrical submersible pump (ESP) motor is preferably fed from a low voltage variable-frequency drive (VFD) followed by a step-up transformer. The motor and drive connection through a long feeder usually causes over ...
Generalized theory of mixed pole machines with a general rotor configuration
(
Elsevier B.V.
, 2013 , Article)
This paper introduces a generalized theory for the operation of mixed pole machines (MPMs). The MPM has two stator windings, namely the main winding with pole pairs P1 and the control winding with pole pairs P2. The MPM ...
Traction system with on-board inductive power transfer
(
Institution of Engineering and Technology
, 2014 , Conference Paper)
In traction applications based on long primary and short secondary type, contactless electrical energy transmission can offer distinct advantages over the conventional energy transmission based on catenary system to provide ...
An Improved Torque Density Pseudo Six-Phase Induction Machine Using a Quadruple Three-Phase Stator Winding
(
Institute of Electrical and Electronics Engineers Inc.
, 2020 , Article)
The nine-phase six-terminal induction machine has recently been proposed as a promising contender to the conventional six-phase asymmetrical winding machine in terms of torque density, phase current quality, stator winding ...
A New Six-Phase FSCW Layout for Permanent Magnet Synchronous Wind Generators
(
Institute of Electrical and Electronics Engineers Inc.
, 2020 , Conference Paper)
This paper proposes a new non-overlapped six-phase Fractional Slot Concentrated Winding (FSCW) layout for a Permanent Magnet (PM) synchronous wind generator with an outer rotor and surface mounted magnets. The proposed ...
Postfault control of scalar (V/f) controlled asymmetrical six-phase induction machines
(
Institute of Electrical and Electronics Engineers Inc.
, 2018 , Article)
With the accelerated development in semiconductor power devices along with the dictated rigorous reliability standards in some industrial sectors, the application of a medium-voltage high-power multiphase induction machine ...
A cascaded boost inverter-based open-end winding three-phase induction motor drive for photovoltaic-powered pumping applications
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Although PWM inverter-fed drives are now a well-established technology in industrial applications, the generation of common mode voltage associated with these modulation techniques results in undesired bearing current and ...
Interior permanent magnet motor-based isolated on-board integrated battery charger for electric vehicles
(
Institution of Engineering and Technology
, 2018 , Article)
This study proposes an isolated on-board integrated battery charger using an interior permanent magnet (IPM) machine with a nine-slot/eight-pole combination or its multiples, and equipped with a non-overlapped fractional ...