Search
Now showing items 1-10 of 14
Performance of a five-phase boost inverter-fed submersible induction machine
(2013 , Conference Paper)
An electrical submersible pump (ESP) motor is preferably fed from a low voltage variable-frequency drive (VFD) followed by a step-up transformer. The motor and drive connection through a long feeder usually causes over ...
Traction system with on-board inductive power transfer
(
Institution of Engineering and Technology
, 2014 , Conference Paper)
In traction applications based on long primary and short secondary type, contactless electrical energy transmission can offer distinct advantages over the conventional energy transmission based on catenary system to provide ...
An Improved Torque Density Pseudo Six-Phase Induction Machine Using a Quadruple Three-Phase Stator Winding
(
Institute of Electrical and Electronics Engineers Inc.
, 2020 , Article)
The nine-phase six-terminal induction machine has recently been proposed as a promising contender to the conventional six-phase asymmetrical winding machine in terms of torque density, phase current quality, stator winding ...
A New Six-Phase FSCW Layout for Permanent Magnet Synchronous Wind Generators
(
Institute of Electrical and Electronics Engineers Inc.
, 2020 , Conference Paper)
This paper proposes a new non-overlapped six-phase Fractional Slot Concentrated Winding (FSCW) layout for a Permanent Magnet (PM) synchronous wind generator with an outer rotor and surface mounted magnets. The proposed ...
Postfault control of scalar (V/f) controlled asymmetrical six-phase induction machines
(
Institute of Electrical and Electronics Engineers Inc.
, 2018 , Article)
With the accelerated development in semiconductor power devices along with the dictated rigorous reliability standards in some industrial sectors, the application of a medium-voltage high-power multiphase induction machine ...
A cascaded boost inverter-based open-end winding three-phase induction motor drive for photovoltaic-powered pumping applications
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Although PWM inverter-fed drives are now a well-established technology in industrial applications, the generation of common mode voltage associated with these modulation techniques results in undesired bearing current and ...
Interior permanent magnet motor-based isolated on-board integrated battery charger for electric vehicles
(
Institution of Engineering and Technology
, 2018 , Article)
This study proposes an isolated on-board integrated battery charger using an interior permanent magnet (IPM) machine with a nine-slot/eight-pole combination or its multiples, and equipped with a non-overlapped fractional ...
A five-phase linear induction machine with planar modular winding
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Linear induction motors (LIMs) have become a competitive alternative in electric traction. Three-phase LIM commonly uses double layer overlapping distributed windings. Although this winding configuration results in more ...
A new single tooth winding layout for a single-phase induction motor with segmented stator
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Machines with modular structure significantly simplify the manufacturing process, particularly the stator winding, and highly increase the slot fill factor. The non-overlapping concentrated winding, or single tooth winding, ...
Calculation of derating factors based on steady-state unbalanced multiphase induction machine model under open phase(s) and optimal winding currents
(
Elsevier
, 2014 , Article)
Multiphase machines have become a promising candidate in high-power applications as they offer many advantages over their three-phase counterparts. The main salient feature is the high fault tolerance capability. During ...