Search
Now showing items 1-10 of 10
Synthesis and characterisation of Ni–B/Ni–P–CeO2 duplex composite coatings
(
Springer Netherlands
, 2018 , Article)
Abstract: Binary (Ni–B, Ni–P) and duplex coatings (Ni–B/Ni–P, Ni–B/Ni–P–CeO2) with an inner Ni–B layer were electrodeposited on mild steel substrates. A comparison of the structural, surface, mechanical, and electrochemical ...
Thermoelectric Behavior of Nanocrystalline Tin Selenide Nanocomposites
(2018 , Master Thesis)
Thermoelectric technology converts thermal energy to electricity. Many studies were conducted on thermoelectric materials such as Bismuth Telluride and Lead Telluride. And the goal was to achieve an average ZT >2 which is ...
Surfactant-aided impregnation of MnF2 into CNT fabrics as cathode material with high electrochemical performance for lithium ion batteries
(
Elsevier
, 2018 , Article)
© 2018 Elsevier Ltd MnF2 infiltrated-CNT fabrics was prepared by surfactant-aided impregnation of MnSiF6 precursors in acid-treated CNT fabric followed by annealing MnSiF6-loaded CNT fabric. The structural and morphological ...
Study of polyaniline-silver nanocomposite as humidity sensor
(
Hamad bin Khalifa University Press (HBKU Press)
, 2018 , Conference Paper)
Study of polyaniline-silver nanocomposite as humidity sensor J. Bhadra, A. Popelka, N. J. Al-Thani, A. Abdulkareem Center for Advanced Materials, Qatar University, Qatar Abstract In this piece of work focus on fabrication ...
Stretchable quaternary phasic PVDF-HFP nanocomposite films containing graphene-titania-SrTiO3 for mechanical energy harvesting
(
Springer Nature
, 2018 , Article)
Integrating efficient energy harvesting materials in to soft, flexible, and eco-friendly substrates could yield significant breakthroughs in wearable and flexible electronics. Substantial advances are emerged in fabricating ...
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
(
Elsevier Ltd
, 2018 , Article)
Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ...
Laser Induced Periodic Surface Structures on Nano Metal Oxide filled Polyvinylidene Fluoride Nanocomposites
(
Elsevier
, 2018 , Article)
The ability of polarized pulsed laser in surface modification of substrate surfaces without thermally destroying them is a well-established concept of scientific procedure. In this work, we report the laser induced surface ...
Engineering and understanding of synergistic effects in the interfaces of rGO-CNTs/PtPd nanocomposite revealed fast electro-oxidation of methanol
(
Elsevier
, 2018 , Article)
The developing human societies are being faced provoking energy crises due to higher demands of energy for increasing worldwide populations. The massive depletion of natural resources and global warming issues sound a laud ...
Controlling the sensing performance of rGO filled PVDF nanocomposite with the addition of secondary nanofillers
(
Elsevier Ltd
, 2018 , Article)
This study reports the synthesis and characterization of polyvinylidene fluoride (PVDF) nanocomposites containing binary filler combination of reduced graphene oxide and titanium dioxide (TiO2) nanotubes. The PVDF nanocomposite ...
Surface modification and grafting of carbon fibers: A route to better interface
(
Elsevier Ltd
, 2018 , Article)
This review is an audit of various Carbon fibers (CF) surface modification techniques that have been attempted and which produced results with an enhancement in the interfacial characteristics of CFRP systems. An introduction ...