Search
Now showing items 1-7 of 7
Influence of Surface Finish on Fatigue Life of Steel Specimens Subjected to Pure Bending
(
Qatar University
, 1990 , Article)
It has long been appreciated that surface conditions exert significant influence on fatigue behavior. The new capabilities of identifying and measuring surface parameters together with the significant development in data ...
Correlations Of Some Tensile Properties For Various Grades Of Low Density Polyethylene
(
Qatar University
, 1994 , Article)
The tensile properties of nine different grades of low density polyethylene were measured, and the relationships resulting from the combination of different pairs of properties were analyzed. It was found that some properties ...
Investigation of In-Service Parameters Influencing the Wear and Wear Rate for Two Rubbing Surfaces
(
Qatar University
, 1989 , Article)
A study has been conducted on the volumetric wear and wear rate as well as the quality of the surfaces produced by rubbing brass and steel specimens. Effect of end pressure and total sliding distance between the two rubbed ...
Flow and Fracture Behaviour of Tungsten Fiber Reinforced Superalloy Composites-Effect Of Specimen Geometry
(
Qatar University
, 1989 , Article)
The influence of aspect ratio (i.e. width to height ratio) of test specimens on the flow and fracture behaviour of fiber reinforced composites is herein examined. The composite material was prepared by isostatic pressing ...
Examination Of An Oil Separator Pressure Vessel (Case History)
(
Qatar University
, 1991 , Article)
Material Behaviour Under Corrosive Environment — Guide For Material Selection
(
Qatar University
, 1988 , Article)
In this paper, the behaviour of engineering materials as influenced by fluid velocity, operating temperature, humidity and duration of exposure to chemical and/or electro-chemical action is carefully studied, corrosive ...
Control of Void Formation During Forging of Advanced Fiber Reinforced Composite Materials
(
Qatar University
, 1989 , Article)
Increased interest has emerged in recent years in the development of fiber reinforced superalloy composite materials and the fabrication processes to produce composite turbine vanes and blades for advanced gas turbine ...