بحث بسيط
السجلات المعروضة 31 -- 40 من 93
From Zirconium Nanograins to Zirconia Nanoneedles
(
Nature Publishing Group
, 2016 , Article)
Combinations of three simple techniques were utilized to gradually form zirconia nanoneedles from zirconium nanograins. First, a physical vapor deposition magnetron sputtering technique was used to deposit pure zirconium ...
An investigation into hybrid carbon/glass fiber reinforced epoxy composite automotive drive shaft
(
Elsevier
, 2011 , Article)
This paper examines the effect of fiber orientation angles and stacking sequence on the torsional stiffness, natural frequency, buckling strength, fatigue life and failure modes of composite tubes. Finite element analysis ...
Energy absorption capability of composite hexagonal ring systems
(
Elsevier, Ltd
, 2012 , Article)
An extensive experimental investigation of inplane crushing of composite hexagonal ring system between platens has been carried out. Woven roving glass/epoxy hexagonal ring system with different angles and arrangement were ...
An experimental investigation into mechanical behavior of hybrid and nonhybrid composite semi-elliptical springs
(
Elsevier, Ltd
, 2013 , Article)
This study introduces a new composite semi-elliptical suspension spring by utilizing fiber reinforced composite strength in principal direction instead of shear direction. Three types of composites were tested, namely, ...
Monitoring and control of beta-distributed multistage production processes
(
Taylor and Francis Ltd.
, 2019 , Article)
Multistage statistical process control (SPC) is an effective procedure for ensuring quality of products in multistage manufacturing processes. Effective SPC approaches for monitoring and controlling quality in multistage ...
Investigation of the effect of Al-8B master alloy and strain-induced melt activation process on dry sliding wear behavior of an Al–Zn–Mg–Cu alloy
(
Elsevier, Ltd
, 2014 , Article)
Abstract This study was undertaken to investigate the influence of Al–8B master alloy and modified strain-induced melt activation process on the structural characteristics and dry sliding wear behavior of Al–12Zn–3Mg–2.5Cu ...
Numerical and experimental investigation on corrugation geometry for metallic tubes under lateral loading
(
Trans Tech Publications Ltd
, 2018 , Conference Paper)
Energy absorption devices are being used to protect structures from severe damages and reduce injury to occupants during accidents. The integrated characteristics of crash absorption devices can be classified as high energy ...
Characteristics of Intermetallic Compounds in Dissimilar Friction Stir Welding: A Review
(
Springer New York LLC
, 2019 , Article Review)
In the present paper, mechanical and metallurgical characteristics of different dissimilar weldments fabricated by friction stir welding were investigated. Existence of lamellar composite structure within the stir zone in ...
Nonlinear free and forced vibrations of graphene nanoplatelet reinforced microbeams with geometrical imperfection
(
Springer Verlag
, 2019 , Article)
Nonlinear free/forced vibration of a functionally graded graphene nanoplatelet (GNP) reinforced microbeam having geometrical imperfection which is rested on a non-linear elastic substrate have been studied in the present ...
An adaptive thresholding-based process variability monitoring
(
Taylor and Francis Inc.
, 2019 , Article)
In high-dimensional processes, monitoring process variability is considerably difficult due to the large number of variables and the limited number of samples. Monitoring changes in the covariance matrix of a multivariate ...