Search
Now showing items 31-39 of 39
A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap ...
Elimination of reverse recovery effects associated with CoolMOS devices employing current source inverter topology
(
IET
, 2012 , Conference Paper)
MOSFET transistors are continuously being an essential part of power electronic converters due to their low switching losses at high switching frequencies. However, the traditional power MOSFET suffers from a relatively ...
Voltage sensorless current control of low power inverter-based distributed generation systems
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
The control of power electronic converters is subjected to several challenges as measurement sensors drift, malfunction in harsh environments, non-ideal grid, and performance degradation due to the delay of discrete control ...
A new five-phase to three-phase back-to-back current source converter based wind energy conversion system
(
IEEE
, 2013 , Conference Paper)
Wind energy is one of the fastest growing renewable energy sources. The increased penetration of wind power into the utility grid brings challenges such as voltage and frequency fluctuations, generator torque ripples, and ...
Single phase grid connected current source inverter: Mitigation of oscillating power effect on the grid current
(
Institution of Engineering and Technology
, 2011 , Conference Paper)
Although voltage source inverters (VSIs) are the most common DC-AC grid-tied converters, current source inverters (CSIs) are considered to be promising candidate, thanks to their low THD voltages/currents and inherent ...
Flywheel energy storage system based on boost DC-AC converter
(
http://dx.doi.org/10.1049/cp.2011.0194
, 2011 , Conference Paper)
An additional DC-DC boost converter is used in conventional configuration of Flywheel Energy Storage System (FESS) to regulate the output voltage during flywheel low speeds. This paper presents a new FESS based on the boost ...
Multi-module high voltage pulse generator based on DC-DC boost converter and CDVMs for drinking water purification
(
Institute of Electrical and Electronics Engineers Inc.
, 2016 , Conference Paper)
High pulsed electric field (PEF) can be used effectively in drinking water purification, by applying it across the water sample to be treated. Application of sufficient high PEF guarantees killing of harmful germs and ...
Dynamic voltage restorer for voltage sag mitigation in oil & gas industry
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
The objective of this paper is to design and implement an efficient and economical dynamic voltage restorer (DVR) to compensate for voltage sag conditions in oil and gas industry. In a power distribution system or plant ...
A modified modulation scheme for capacitor voltage control of renewable energy-fed grid-connected Z-Source Inverters
(
IEEE
, 2012 , Conference Paper)
An important issue in grid connection applications is boosting the limited output voltage of the renewable energy sources. Two-stage converters are most commonly employed for successful grid connection and optimum power ...