بحث بسيط
السجلات المعروضة 21 -- 29 من 29
A stationary frame current control for inverter-based distributed generation with sensorless active damped LCL filter using Kalman filter
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
Due to the large variety of renewable power sources, power electronics play an important role in energy conversion. Different power converter topologies are used to interface distributed power generation systems (DPGS) ...
Maximum power transfer of PV-fed inverter-based distributed generation with improved voltage regulation using flywheel energy storage systems
(
Institute of Electrical and Electronics Engineers Inc.
, 2014 , Conference Paper)
One of the main issues accompanied with the high penetration of PV distributed generation (DG) systems in low voltage (LV) networks is the overvoltage challenge. The amount of injected power to the grid is directly related ...
A wind turbine architecture employing a new three port magnetic gear box
(
IEEE Computer Society
, 2012 , Conference Paper)
Mechanical gearboxes are typically employed with doubly-fed induction generator based wind turbines to convert the turbine's low speed mechanical power into high-speed mechanical power to drive the electrical generator. ...
Fault ride-through capability enhancement based on flywheel energy storage system for wind farms connected via VSC high voltage DC transmission
(
Institution of Engineering and Technology
, 2012 , Conference Paper)
This paper proposes a recovery strategy for wind energy-fed voltage source converter high voltage DC transmission systems, capable of maintaining power balance between the AC and DC sides during different AC faults. This ...
Multi-module Bi-directional Buck-Boost Inverter-based HVDC back-to-back transmission system
(
IEEE
, 2013 , Conference Paper)
Offshore wind energy is now seen as a key contributor to the renewable energy future. HVDC technology is among the chief technologies enabling widespread use of offshore wind. This paper proposes a new configuration, namely, ...
Vector control of multiphase induction machine under open-circuit phase faults
(
IEEE Computer SocietyIEEE
, 2013 , Conference Paper)
Multiphase induction machine is normally controlled using rotor field oriented vector control. Under phase(s) loss, the machine currents can be optimally controlled to satisfy certain optimization criteria. In this paper, ...
A simple active-power control technique for grid-connected three-phase inverters at unity power factor
(
IEEE Computer Society
, 2013 , Conference Paper)
This paper presents a simple active-power control technique for low voltage grid-connected three-phase inverters with zero injected reactive power (unity power factor at grid). Two versions of the proposed controller are ...
A novel open-stator-winding DFIM flywheel architecture for renewable energy applications
(
IEEE
, 2013 , Conference Paper)
Energy storage is becoming a basic component of modern renewable power plants, especially wind farms. For several considerations, local wind turbine (WT) energy storage is preferred. Flywheel energy storage is among the ...
Control of doubly-fed induction machine storage system for constant charging/discharging grid power using artificial neural network
(
IET
, 2012 , Conference Paper)
A large-capacity low-speed flywheel energy storage system based on a doubly-fed induction machine (DFIM) basically consists of a wound-rotor induction machine, and a back-to-back converter for rotor excitation. It has been ...