Search
Now showing items 1-10 of 11
HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing
(
Institution of Engineering and Technology
, 2014 , Conference Paper)
Conventionally, tapping-off a small amount of power from an HVDC transmission line to a three-phase local network can be achieved using a DC-to-AC voltage source converter (VSC) followed by a step down transformer. In order ...
Multimodule Boost-Converter-Based Pulse Generators: Design and Operation
(
Institute of Electrical and Electronics Engineers Inc.
, 2020 , Article)
In this article, three different types of pulse generators based on multimodule boost converter ringing circuit are presented, namely, interleaved, stacked, and interleaved-stacked with full design and operational concept. ...
Postfault control of scalar (V/f) controlled asymmetrical six-phase induction machines
(
Institute of Electrical and Electronics Engineers Inc.
, 2018 , Article)
With the accelerated development in semiconductor power devices along with the dictated rigorous reliability standards in some industrial sectors, the application of a medium-voltage high-power multiphase induction machine ...
An asymmetrical six-phase induction motor drive based on nine-arm Modular Multilevel Converter (9AMMC) with circulating current suppression
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Asymmetrical six-phase (dual three-phase) induction motors have received significant attention in high power medium voltage drive applications. Normally, two three-phase voltage source converters are used to supply the ...
HVDC shunt tap based on three single-phase half-bridge series-connected MMCs operated under 2L modulation
(
Institution of Engineering and Technology
, 2019 , Article)
In this study, a cost-effective HVDC shunt tap with low-number of relatively low-voltage semiconductor devices and small-sized passive components is proposed. The proposed architecture is based on employing three single-phase ...
Hybrid Modular Multilevel Converter with Arm-Interchange Concept for Zero-/Low- Frequency Operation of AC Drives
(
Institute of Electrical and Electronics Engineers Inc.
, 2020 , Article)
DC-AC Modular Multilevel Converter (MMC) is a promising candidate for high-power AC drive applications. The main challenge of operating the MMC in AC drive applications is its performance during low-frequency conditions, ...
A nine-arm modular multilevel converter (9A-MMC) for six-phase medium voltage motor drives
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Dual three-phase (asymmetrical six-phase) induction motors have received significant attention in high power medium voltage drive applications. Typically, two three-phase voltage source converters are needed to feed such ...
A grid-connected HVDC shunt tap based on series-input parallel-output DC-AC multi-module 2-level voltage source converters
(
Institute of Electrical and Electronics Engineers Inc.
, 2015 , Conference Paper)
Tapping-off a small amount of power from an HVDC transmission line to a three-phase local grid can be achieved by using shunt or series HVDC taps. This paper proposes a new grid-connected HVDC shunt tap. The proposed tap ...
HVDC shunt tap based on series-input parallel-output DC-AC multi-module VSCs with DC voltages balancing
(
Institution of Engineering and Technology
, 2014 , Conference Paper)
Conventionally, tapping-off a small amount of power from an HVDC transmission line to a three-phase local network can be achieved using a DC-to-AC voltage source converter (VSC) followed by a step down transformer. In order ...
Multiple-module high-gain high-voltage DCDC transformers for offshore wind energy systems
(
IEEE
, 2011 , Article)
Renewable energy sources, such as offshore wind farms, require high voltage gains in order to interface with power transmission networks. These conversions are normally made using bulky, complex, and costly transformers ...