Browsing Mechanical & Industrial Engineering by Title
Now showing items 1227-1246 of 1321
-
Thermal Structural Optimization of IC Engine Piston
( International Journal of Mechanical Engineering and Robotics Research , 2021 , Article)The primary purpose of this work is to investigate the effect of the piston crown and piston boss thicknesses on the stresses generated on the piston. A 150-cc piston, made from A4032 Aluminum, of type “Bajaj,” was considered ... -
Thermal vibration of two-dimensional functionally graded (2D-FG) porous Timoshenko nanobeams
( Techno Press , 2017 , Article)The thermo-mechanical vibration behavior of two dimensional functionally graded (2D-FG) porous nanobeam is reported in this paper. The material properties of the nanobeam are variable along thickness and length of the ... -
Thermo elastic analysis of functionally graded rotating disks with temperature-dependent material properties: uniform and variable thickness
( Springer Science+Business Media, B.V. , 2009 , Article)A thermo elastic analysis is presented for axisymmetric rotating disks made of functionally graded material (FGM) with variable thickness. Material properties are assumed to be temperature-dependent and graded in the radial ... -
Thermo-mechanical buckling analysis of FG-GNPs reinforced composites sandwich microplates using a trigonometric four-variable shear deformation theory
( Elsevier , 2021 , Article)The current study is aimed to investigate the thermo-mechanical buckling responses of the sandwich microplate with Graphene nanoplatelets (GNPs)-reinforced Epoxy core fully bonded to single-walled carbon nanotubes ... -
Thermo-mechanical vibration of rotating axially functionally graded nonlocal Timoshenko beam
( Springer Verlag , 2017 , Article)The free vibration analysis of rotating axially functionally graded nanobeams under an in-plane nonlinear thermal loading is provided for the first time in this paper. The formulations are based on Timoshenko beam theory ... -
Thermochemical splitting of CO2 using solution combustion synthesized LaMO3 (where, M = Co, Fe, Mn, Ni, Al, Cr, Sr)
( Elsevier B.V. , 2020 , Article)The effort of this paper was to recognize the inclusion of appropriate dopants that will upgrade the redox reactivity of La-based perovskites. By maintaining the fuel (glycine) to metal nitrate ratio () = 1, the LaMO3 ... -
Thermodynamic and anticancer properties of inorganic zinc oxide nanoparticles synthesized through co-precipitation method
( Elsevier B.V. , 2021 , Article)In this paper, inorganic zinc oxide nanoparticles (ZnO NPs) were synthesized through co-precipitation method and after evaluating their physicochemical properties by using TEM and XRD techniques, the bio-thermodynamic and ... -
Thermoeconomic Analysis of a Solar-Assisted Industrial Process Heating System
( Wiley-Hindawi , 2024 , Article)Thermal energy in the industrial sector for process heating applications in the range of 50 to 250°C consumes about 35% of the global fossil fuel. Cascaded solar thermal systems are promising solutions to meet clean and ... -
Thermoeconomic and optimization analyses of direct oxy-combustion supercritical carbon dioxide power cycles with dry and wet cooling
( Elsevier , 2021 , Article)Oxy-combustion supercritical CO2 power cycles have the advantages of high-energy efficiency and near-zero pollutant emissions. Thus, these cycles are considered as an efficient way to reduce CO2 emissions while maintaining ... -
Thermophysical properties measurement of nano cellulose in ethylene glycol/water
( Elsevier , 2017 , Article)Nanofluids are the suspensions of solid nanoparticles in the liquids as base fluids. They have been the latest engineering material among the investigators as they exhibit promising enhanced thermal properties and many ... -
Three Dimensional Computational Study for Spiral Dry Gas Seal with Constant Groove Depth and Different Tapered Grooves
( Elsevier Ltd , 2013 , Conference Paper)The three dimensional simulation for dry gas seal with constant depth spiral grooves and with different taper grooves is done using ANSYS FLUENT CFD code. Grid independence study and code validation are done with experimental ... -
Throughput optimization for the Robotic Cell Problem with Controllable Processing Times
( EDP Sciences , 2017 , Article)In this paper, we present a MIP-based heuristic and an effective genetic algorithm for the Robotic Cell Problem with Controllable Processing Times (RCPCPT). This problem arises in modern automated manufacturing systems and ... -
Tidal power technology review with potential applications in Gulf Stream
( Elsevier Ltd , 2017 , Article Review)With the increasing concern of global warming, the importance of reducing greenhouse gas emissions has been accepted worldwide. Realizing the contribution of conventional energy sources to greenhouse gas emissions and the ... -
Time-domain simulation of second-order irregular wave diffraction based on a hybrid water wave radiation condition
( Elsevier , 2016 , Article)A time-domain second-order method is presented to simulate three-dimensional wave–body interaction. In the approach, Taylor series expansions are applied to the free surface boundary conditions, and a Stokes perturbation ... -
TiO2 nanotube coating on stainless steel 304 for biomedical applications
( Elsevier Ltd , 2015 , Article)The present study describes the anodic growth of TiO2 nanotube thin layer on stainless steel 304 in ethylene glycol/water/ammonium fluoride electrolyte. In this regard, pure titanium was coated on stainless steel 304 ... -
Tissue engineering for artificial organs: Regenerative medicine, smart diagnostics and personalized medicine
( Wiley-VCH Verlag , 2016 , Book)A comprehensive overview of the latest achievements, trends, and the current state of the art of this important and rapidly expanding field. Clearly and logically structured, the first part of the book explores the ... -
Titanium Nanorods Loaded PCL Meshes with Enhanced Blood Vessel Formation and Cell Migration for Wound Dressing Applications.
( Wiley , 2019 , Article)Proper management of nonhealing wounds is an imperative clinical challenge. For the effective healing of chronic wounds, suitable wound coverage materials with the capability to accelerate cell migration, cell proliferation, ... -
TLP bonding of Ti-6Al-4V and Mg-AZ31 alloys using pure Ni electro-deposited coats
( Elsevier B.V. , 2014 , Article)Transient liquid phase (TLP) bonding of Mg-AZ31 and Ti-6Al-4V alloys was performed using pure thin Ni electro-deposited coat interlayer (12 μm). The effect of bonding temperature, time and pressure on microstructural ... -
Tools and Techniques for Food Security and Sustainability Related Assessments: A focus on the Data and Food Waste Management System
( IEOM Society International , 2020 , Conference Paper)Achieving global food security requires addressing series of challenges, from food waste accumulation in the food supply chain (FSC) to tackling the gender disparities and climate-related concerns to promote sustainable ... -
Toward 3D Printed Prosthetic Hands that Can Satisfy Psychosocial Needs: Grasping Force Comparisons Between a Prosthetic Hand and Human Hands
( springer link , 2017 , Conference Paper)The advancement in 3D printing technologies appears to be the key toward affordable and functional artificial limbs. The loss of an amputee’s capability to do functional tasks like grasping objects has an obvious effect ...