Browsing Mechanical & Industrial Engineering by Title
Now showing items 1282-1301 of 1342
-
Transport properties of thermally stable conducting poly(aniline-co-m-hydroxyaniline)
(2021 , Article)Uniform dielectric permittivity of hollow and porous semiconducting copolymer poly(aniline-co-m-hydroxyaniline) (PA-co-m-HA)s has been studied by electrochemical impedance spectroscopy. The copolymer is obtained by the in- ... -
Transverse vibration and stability of a functionally graded rotating annular disk with a circumferential crack
( Elsevier Ltd , 2016 , Article)Out of plane vibration of rotating disks limits their performances especially at certain critical speed. The critical speed of these disks may be affected by the presence of defects such as a circumferential crack. In this ... -
Treatment as prevention for hepatitis C virus in Pakistan: Mathematical modelling projections
( BMJ Publishing Group , 2019 , Article)Objective Direct-Acting antivirals have opened an opportunity for controlling hepatitis C virus (HCV) infection in Pakistan, where 10% of the global infection burden is found. We aimed to evaluate the implications of five ... -
Tribo-mechanical properties and corrosion behavior investigation of anodized Ti-V alloy
( MDPIAG , 2018 , Article)In the work presented in this manuscript, a self-organized TiO2 nanotube array film was produced by electrochemical anodization of a Ti-V alloy in an electrolyte containing NH4F/H3PO4 and then annealed at different ... -
Tribo-mechanical properties evaluation of HA/TiO2/CNT nanocomposite
( Nature Research , 2021 , Article)In this study, a combination of reverse microemulsion and hydrothermal techniques were used to synthesize HA. A hydrothermal method was used to synthesize HA/TiO2/CNT nanocomposite powders. Cold and hot isostatic pressing ... -
Tribological behaviour of 1D and 2D nanofiller based high densitypoly-ethylene hybrid nanocomposites: A run-in and steady state phase analysis
( Elsevier Ltd , 2017 , Article)Hybrid nanocomposites are a class of materials with exceptional properties due to the synergizing effect of individual fillers. Current work reports the tribological behaviour of high densitypolyethylene-(HDPE) reinforced ... -
Tribological studies of nanomodified mineral based multi-grade engine oil
( Research India Publications , 2017 , Article)This research study investigates the tribological behaviour of mineral based multi grade engine oil reinforced with nanoadditives using a pin on disc tribometer under different frictional conditions. Load, sliding speed, ... -
Tunable Piezoelectric Generator Coupled with Shape Memory Alloy (SMA) Heat Engine as Thermal Energy Harvester
( Institution of Engineering and Technology , 2022 , Conference Paper)With the ever-growing energy demand and environmental concerns, research on alternative energy is vital for sustainability. Thermal energy harvesting using shape memory alloy (SMA) heat engine is one of the possible methods ... -
Tuning the electrical properties of polyaniline by copolymerization with o-bromoaniline
( World Scientific Publishing Co. Pte Ltd , 2017 , Article)Polyaniline, poly(o-bromoaniline) and poly(aniline-co-o-bromoaniline)s have been prepared by chemical oxidative polymerization methods. A series of poly(aniline-co-o-bromoaniline) derivatives has been prepared by the ... -
Turbulence effects on the autoignition of DME in a turbulent co-flowing jet
( Elsevier , 2017 , Article)Dimethyl ether (DME) autoignition in turbulent co-flowing jets with preheated air is studied using the one-dimensional turbulence (ODT) model. We investigate the effects of molecular and turbulent transport on the autoignition ... -
Turbulence Modeling Using Z-F Model and RSM for Flow Analysis in Z-SHAPE Ducts
( Wiley , 2020 , Article)Turbulent flow in Z-shape duct configuration is investigated using Reynolds stress model (RSM) and ζ-f model and compared to experimental results. Both RSM and ζ-f models are based on steady-state RANS solutions. The focus ... -
Turbulence modeling using Z-F, RSM, LES and WMLES for flow analysis in Z-Shape ducts
( American Society of Mechanical Engineers (ASME) , 2020 , Conference Paper)Turbulent flow in Z-shape duct configuration is investigated and analyzed using Reynolds Stress Model (RSM), Large Eddy Simulation (LES), ζ-f Model, and Wall-Modeled Large Eddy Simulation (WMLES). The results are validated ... -
Turbulent Flames in Enclosed Combustion Chambers: Characteristics and Visualization - A Review
( American Society of Mechanical Engineers (ASME) , 2020 , Article)Remarkable progress has been achieved in measuring the flame propagation rate accurately under laminar conditions, which can be used to predict turbulent flame propagation rates using some correlations fitted to experimental ... -
Underlying Mechanisms of Transit-Oriented Development: A Conceptual System Dynamics Model in Qatar
( MDPI , 2022 , Article)Transit-Oriented Development (TOD) is an urban planning approach that facilitates the achievement of sustainable development goals from an urban planning and transportation perspective. Developed countries are moving rapidly ... -
Understanding Traffic Accidents among Young Drivers in Qatar
( MDPI , 2022 , Article)Young drivers are generally associated with risky driving behaviors that can lead to crash involvement. Many self-report measurement scales are used to assess such risky behaviors. This study is aimed to understand the ... -
Underwater friction stir welding of Al-Mg alloy: Thermo-mechanical modeling and validation
( Elsevier , 2021 , Article)The aim of this article is the in-depth analysis of material behavior during underwater friction stir welding (UFSW) of Al-Mg alloy. A thermo-mechanical model was employed to find the relation between physical changes ... -
Uniform fractional factorial design tables for energy piles with maximum thermal conductance
( WITPress , 2017 , Conference Paper)Energy Piles are the heat exchangers of Ground Source Heat Pumps (GSHP) that transfer the buildings heat to the lower temperature shallow ground reducing the energy consumption in the cooling of buildings. These piles are ... -
Unsteady CFD simulation for high speed centrifugal compressor operating near surge
( American Society of Mechanical Engineers (ASME) , 2014 , Conference Paper)Centrifugal compressor surge and stall are an instabilities flow and system phenomenon, which can lead to a loss of engine power, large pressure transients and, in some cases, failure of the compressor and bearing system. ... -
Urban resilience and livability performance of European smart cities: A novel machine learning approach
( Elsevier , 2022 , Article)Smart cities are centres of economic opulence and hope for standardized living. Understanding the shades of urban resilience and livability in smart city models is of paramount importance. This study presents a novel ... -
Usability evaluation of blood glucose meters for elderly diabetic patients
( Springer Verlag , 2016 , Conference Paper)In the context of this study the usability of the first blood glucose meter that is connectable to a smartphone has been investigated by the use through diabetic patients of different ages and with different technical ...