Browsing Mechanical & Industrial Engineering by Title
Now showing items 416-435 of 1306
-
Effect of crushable blockouts on a full-scale guardrail system
( Taylor and Francis Ltd. , 2017 , Article)Since the performance of the guardrail system depends in part on the compatibility of vehicle-to-roadside hardware, it is important to improve the interaction of the vehicle with the guardrail system by adding more compliance ... -
Effect of fiber loading directions on the low cycle fatigue of intraply carbon-Kevlar reinforced epoxy hybrid composites
( Elsevier Ltd , 2019 , Article)Effect of fiber orientation on tensile and low cycle fatigue of intraply hybrid composites was investigated. In this work, intraply carbon/Kevlar fabric/epoxy hybrid composites were tested for static and cyclic loadings ... -
The effect of fiber orientation on the energy absorption capability of axially crushed composite tubes
( Elsevier, Ltd , 2014 , Technical Report)An experimental investigation to optimize the absorbed energy of axially crushed composite collapsible tubular energy absorber devices was carried out. Different fiber orientation were used in this study (0/90, 15/−75, ... -
Effect of Geometrical Parameters on the Performance of Longitudinal Functionally Graded Femoral Prostheses
(2015 , Article)This study aimed to assess the performance of different longitudinal functionally graded femoral prostheses. This study was also designed to develop an appropriate prosthetic geometric design for longitudinal functionally ... -
The effect of graphene on the activation energy of grain growth for the nanocrystalline thermoelectric n-type Bi2Te2.7Se0.3
( Springer Nature , 2022 , Article)Even though bismuth telluride is frequently produced by mechanical alloying for thermoelectric materials, no data has been published addressing the thermal behavior and activation energy of the milled n-type Bi2Te2.7Se0.3 ... -
The effect of graphene on the activation energy of grain growth for the nanocrystalline thermoelectric n‑type Bi2Te2.7Se0.3
(2022 , Article)Even though bismuth telluride is frequently produced by mechanical alloying for thermoelectric materials, no data has been published addressing the thermal behavior and activation energy of the milled n-type Bi2Te2.7Se0.3 ... -
Effect of hexagonal on the in-plane crushing behaviour of plain weave composite hexagonal quadruple ring system
( Taylor and Francis Ltd. , 2019 , Article)In this study, an experimental investigation into the crushing behaviour of one dimensional composite hexagonal cellular structure between two plates has been carried out. The materials have been used to accomplish the ... -
Effect of high pass filtering of the regenerated reference signal in a single channel active noise control system
( International Institute of Acoustics and Vibration, IIAV , 2018 , Conference Paper)An acoustic noise cancellation (ANC) system with regenerative feedback synthesizes its own reference signal based on the error signal and the adaptive filter output. The prime objective of such a configuration is to estimate ... -
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
( Elsevier Ltd , 2018 , Article)Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ... -
Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites
( Elsevier Ltd , 2020 , Article)This research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying ... -
Effect of individually controlled personalized ventilation on cross-contamination due to respiratory activities
( Elsevier , 2021 , Article)While personalized ventilation (PV) has been integrated to enhance inhaled air quality, some studies showed that it can contribute to contaminants' transport indoors. This work investigates the effect of the individual ... -
Effect of interfacial friction and fold penetration on the progressive collapse of foam-filled frustum using kinematically admissible model
( Taylor and Francis Ltd. , 2018 , Article)In this article, we extend our earlier analytical efforts of the progressive collapse of foam-filled conical frustum with the aid of a kinematically admissible folding mechanism. The instantaneous crushing force as well ... -
Effect of Interlayer Thickness on Joint Formation Between Ti-6Al-4V and Mg-AZ31 Alloys
( Springer New York LLC , 2014 , Article)The joining of a Ti-6Al-4V alloy to a Mg-AZ31 alloy was performed using Ni electroplated coatings during the TLP bonding process. In this work, different coating thicknesses were used ranging from 1 to 20 μm. The effect ... -
Effect of microstructural evolution on wettability and tribological behavior of TiO2 nanotubular arrays coated on Ti–6Al–4V
( Elsevier Ltd , 2015 , Article)Self-organized TiO2 nanotubular arrays were fabricated by electrochemical anodization of Ti–6Al–4V plates in an NH4F/H3PO4 electrolyte. The effect of microstructural evolutions on the wettability and tribological behavior ... -
Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics
( Elsevier Ltd , 2018 , Article)The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ... -
Effect of multi-pass friction stir processing on the microstructure, mechanical and wear properties of AA5083/ZrO2 nanocomposites
( Elsevier Ltd , 2017 , Article)In this study, multi-pass friction stir processing using zirconia nanoparticles was performed on AA5083 sheets to fabricate surface nanocomposites. Effect of using different number of passes on the microstructure, ... -
Effect of nanostructured polyhedral oligomeric silsesquioxane on the physical properties of poly(vinyl alcohol)
( John Wiley and Sons Inc. , 2017 , Article)An effective amphiphilic polyhedral oligomeric silsesquioxane (POSS) encapsulated poly(vinyl alcohol) (PVA) nanocomposite was successfully fabricated by solution blending method. Anionic octa(tetramethylammonium) (Octa-TMA) ... -
Effect of Ni incorporation in cobalt oxide lattice on carbon formation during ethanol decomposition reaction
( Elsevier B.V. , 2019 , Article)In this work, we report the results of catalytic decomposition of ethanol over a porous mixed metal oxide of Ni-Co (NiCoO2) and analyze the effect of Ni incorporation in Co3O4 lattice on the activity and hydrogen selectivity ... -
Effect of phosphorus on controlling and enhancing electrocatalytic performance of Ni–P–TiO2–MnO2 coatings
( Elsevier B.V. , 2018 , Article)Electroless Ni–P coatings have received profound interests in recent years for electrocatalytic Hydrogen Evolution Reaction (HER). Their performance can be significantly enhanced by incorporating metal oxides and tuning ... -
Effect of poly ethylene glycol (PEG) on structural, thermal and photoluminescence properties of CdO nanoparticles for optoelectronic applications
( Elsevier Ltd , 2019 , Conference Paper)Current study deals with capped/uncapped Cadmium Oxide Nanoparticles (CdO NPs) synthesized by chemical precipitation technique. Structural, morphological, thermal and optical properties of these samples were investigated ...