Search
Now showing items 1-9 of 9
Simulation and experimental study of underwater dissimilar friction-stir welding between aluminium and steel
(
Elsevier
, 2020 , Article Review)
The volume of fluid (VOF) modeling method was implemented to simulate the underwaterfriction-stir welding (FSW) process for dissimilar joining between aluminum and steel. Tem-perature profile, materials flow, and intermixing ...
Microstructure, thermal and mechanical response of AZ51/Al2O3 nanocomposite with 2 wt.% Ca addition
(
Elsevier, Ltd
, 2013 , Article)
In the present study, new AZ51/Al2O3–2Ca magnesium nanocomposite was successfully synthesized by simultaneously adding 2wt.% aluminum, 2wt.% Ca and 1.5vol.% nanosized Al2O3 (50nm) into AZ31 matrix using a disintegrated ...
Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets
(
Elsevier Ltd
, 2018 , Article)
Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ...
Characterization of biogenic hydroxyapatite derived from animal bones for biomedical applications
(
Elsevier Ltd
, 2018 , Article)
© 2018 Elsevier Ltd and Techna Group S.r.l. In this work, the viability of producing biogenic hydroxyapatite from bio-waste animal bones, namely bovine (cow), caprine (goat) and galline (chicken), through a heat treatment ...
Enhancing Tensile and Compressive Strength of AZ41 Magnesium Alloy by Adding Nano-Sized Al2O3
(
John Wiley & Sons, Inc.
, 2014 , Book chapter)
Effect of copper-nickel interlayer thickness on laser welding-brazing of Mg/Ti alloy
(
Elsevier Ltd
, 2019 , Article)
Dissimilar lap joining of AZ31B Mg alloy to Cu-Ni coated Ti-6Al-4V was carried out by laser welding-brazing method. The effect of Cu and Ni contents on interfacial reaction and joint fracture load were analyzed. For the ...
TLP bonding of Ti-6Al-4V and Mg-AZ31 alloys using pure Ni electro-deposited coats
(
Elsevier B.V.
, 2014 , Article)
Transient liquid phase (TLP) bonding of Mg-AZ31 and Ti-6Al-4V alloys was performed using pure thin Ni electro-deposited coat interlayer (12 μm). The effect of bonding temperature, time and pressure on microstructural ...
Effect of multi-pass friction stir processing on the microstructure, mechanical and wear properties of AA5083/ZrO2 nanocomposites
(
Elsevier Ltd
, 2017 , Article)
In this study, multi-pass friction stir processing using zirconia nanoparticles was performed on AA5083 sheets to fabricate surface nanocomposites. Effect of using different number of passes on the microstructure, ...
Influence of electrodeposited Cu-Ni layer on interfacial reaction and mechanical properties of laser welded-brazed Mg/Ti lap joints
(
Elsevier
, 2019 , Article)
A fiber laser welding-brazing procedure has been developed for joining AZ31B magnesium alloy to Cu-Ni coated Ti-6Al-4V titanium sheet using AZ92D filler wire. The effect of the interlayer arrangements (AZ31B/Ni-Cu/Ti-6Al-4V ...