Mechanical & Industrial Engineering: Recent submissions
Now showing items 101-120 of 1396
-
Enhancing Safety in Geological Carbon Sequestration: Supervised Machine Learning for Early Detection and Mitigation of CO2 Leakage in Injection Wells
( International Petroleum Technology Conference (IPTC) , 2024 , Conference Paper)The efficient and safe operation of CO2 injection wells during geological sequestration is crucial for successful carbon capture and storage (CCS) projects. This study explores the application of machine learning in creating ... -
Turbulence modeling using Z-F, RSM, LES and WMLES for flow analysis in Z-Shape ducts
( American Society of Mechanical Engineers (ASME) , 2020 , Conference Paper)Turbulent flow in Z-shape duct configuration is investigated and analyzed using Reynolds Stress Model (RSM), Large Eddy Simulation (LES), ζ-f Model, and Wall-Modeled Large Eddy Simulation (WMLES). The results are validated ... -
Harvesting water from air using adsorption material - Prototype and experimental results
( Elsevier , 2021 , Article)Drinking water resources have always been limited in the gulf region of the Middle East and other desert regions around the world. In attempt to provide viable supplement, a device that harvests clean drinking water from ... -
Large-eddy simulation of the flow in Z-Shape duct
( Cogent OA , 2020 , Article)A numerical study is conducted of the transient flow in a z-shape three-dimensional duct using large-eddy simulation (LES) with dynamic eddy viscosity subgrid-scale (SGS) model with a fully structured grid system. The ... -
Single and multiphase flow leak detection in onshore/offshore pipelines and subsurface sequestration sites: An overview
( Elsevier , 2024 , Article)Leaks may occur in existing pipelines, even when designed with quality construction and appropriate regulations. The economic impact of oil spills and natural gas dispersion from leaks can be huge. Failure to detect pipeline ... -
Thermoeconomic Analysis of a Solar-Assisted Industrial Process Heating System
( Wiley-Hindawi , 2024 , Article)Thermal energy in the industrial sector for process heating applications in the range of 50 to 250°C consumes about 35% of the global fossil fuel. Cascaded solar thermal systems are promising solutions to meet clean and ... -
Performance analysis of various machine learning algorithms for CO2 leak prediction and characterization in geo-sequestration injection wells
( Elsevier , 2024 , Article)The effective detection and prevention of CO2 leakage in active injection wells are paramount for safe carbon capture and storage (CCS) initiatives. This study assesses five fundamental machine learning algorithms, namely, ... -
Isobaric Expansion Engines Powered by Low-Grade Heat-Working Fluid Performance and Selection Database for Power and Thermomechanical Refrigeration
( Wiley-VCH Verlag , 2020 , Article)A database is developed for the most suitable working fluids for Worthington-type and Bush-type isobaric engines based on their performances for a wide range of heat source temperature, from 40 to 300 °C, and operating ... -
Digital twin in energy industry: Proposed robust digital twin for power plant and other complex capital-intensive large engineering systems
( Elsevier , 2022 , Article Review)The complex future power plants require digital twin (DT) architecture to achieve high reliability, availability and maintainability at lower cost. The available research on DT for power plants is limited and lacks details ... -
Performance investigation of solar photovoltaic panels using mist nozzles cooling system
( Taylor and Francis Ltd. , 2024 , Article)Solar PV has a disadvantage over its many advantages that its electrical efficiency falls due to rise in surface/operating temperature of solar PV cells. Therefore, it is necessary to find a way to mitigate the efficiency ... -
Dataset for measured viscosity of Polyalpha-Olefin- boron nitride nanofluids
( Elsevier , 2021 , Dataset)Datasets of measured viscosity of Polyalpha-Olefin- boron nitride (PAO/hBN) nanofluids are reported. An AR-G2 rheometer (from TA Instruments) experimental setup is used for measuring the rheological property of PAO/hBN ... -
Heat transfer measurements of Polyalpha-Olefin- boron nitride nanofluids for thermal management and lubrication applications
( Elsevier , 2020 , Article)In this paper, the first study is reported combining Polyalpha-Olefin (PAO) oil with hexagonal Boron Nitride (hBN) to produce new class of nanofluids for heat transfer and lubrication applications. The heat transfer ... -
Turbulence Modeling Using Z-F Model and RSM for Flow Analysis in Z-SHAPE Ducts
( Wiley , 2020 , Article)Turbulent flow in Z-shape duct configuration is investigated using Reynolds stress model (RSM) and ζ-f model and compared to experimental results. Both RSM and ζ-f models are based on steady-state RANS solutions. The focus ... -
Modeling and Analysis of Effect of Various Tank Geometries and Relief Pressure on Liquid Hydrogen (LH2) Boil-Off Losses
( Scanditale AB , 2024 , Conference Paper)This research investigates the effect of various storage tank geometries and relief pressure on boil-off losses for liquid hydrogen (LH2). The effect of storage volume of LH2 in the tanks for the various geometries is ... -
Dynamic Modeling and Analysis of Solar Industrial Process Heating (SIPH) for the Food industry
( Scanditale AB , 2024 , Conference Paper)Thermal energy requirements in the industrial sector for different process heating applications consume about 35% of the total global fossil fuels. To mitigate the consumption of fossil fuels, solar industrial process ... -
Towards a Resilient Organization: Lessons Learned from the Oil and Gas Sector in Qatar
( MDPI , 2024 , Article)Organizational resilience indicates the capacity of an organization or a system to return to its steady condition, or exceed it, after going through a disruptive event that disrupts its steady condition. Qatar's oil and ... -
Modeling the Relationship between Business Process Reengineering and Organizational Culture
( MDPI , 2022 , Article)Business process reengineering (BPR) has been widely known for its effectiveness in generating chances for organizational improvement. Understanding and modeling the relationship between the factors that contribute to the ... -
Composite Plastic Hybrid for Automotive Front Bumper Beam
( MDPI , 2023 , Article)The bumper beam is a crucial component of the automobile bumper system, responsible for absorbing impact energy and enhancing the safety of passengers during collisions. This paper presents the design and experimental ... -
Innovation Ecosystems in Hydrocarbon-Based Economies: Opportunities and Challenges
( MDPI , 2023 , Article Review)Innovation is rapidly growing and affecting various industries, including hydrocarbon processing. This study aims to conduct a comprehensive and organized review of the literature on innovation ecosystems and their performance ... -
Improved exosome isolation methods from non-small lung cancer cells (NC1975) and their characterization using morphological and surface protein biomarker methods
( Springer Science and Business Media Deutschland GmbH , 2023 , Article)This study has demonstrated improved methods for isolating exosomes from non-small lung cancer cells, which address the problems characterized by exosome morphological and chemical methods. To improve the isolation methods, ...
