Search
Now showing items 1-10 of 46
A Droop Control Design for Multiterminal HVDC of Offshore Wind Farms With Three-Wire Bipolar Transmission Lines
(
IEEE
, 2015 , Article)
Converting existing ac transmission lines to an extended multiterminal three-wire bipolar HVDC system can be considered a cost-effective way to interconnect dispersed offshore wind farms to onshore ac grids instead of ...
A series flywheel architecture for power levelling and mitigation of DC voltage transients in multi-terminal HVDC grids
(
Institution of Engineering and Technology
, 2014 , Article)
This study proposes a new architecture of flywheel energy storage system (FESS) which can be implemented at generating unit (GU) level (e.g. wind turbine) or scaled up for application in grid-side converter (GSC) stations ...
Three-wire bipolar high-voltage direct current line using an existing single-circuit high-voltage alternating current line for integrating renewable energy sources in multiterminal DC networks
(
Institution of Engineering and Technology
, 2016 , Article)
When compared with conventional point-To-point high-voltage direct current (HVDC) systems, multiterminal HVDC (MTDC) systems are more economical and flexible. MTDC systems can tie distributed high power renewable energy ...
New tri-switching state non-isolated high gain DC-DC boost converter for microgrid application
(
Institution of Engineering and Technology
, 2019 , Article)
High efficiency is an important requirement from DC-DC converter in DC microgrid system when integrated with renewable energy sources. This study proposes a new tri-switching state non-isolated high gain boost converter ...
A Pulsewidth Modulation Technique for High-Voltage Gain Operation of Three-Phase Z-Source Inverters
(
Institute of Electrical and Electronics Engineers Inc.
, 2016 , Article)
Z-source inverter (ZSI) was recently proposed as a single-stage buck-boost dc-ac power conversion topology. It augments voltage boost capability to the typical voltage buck operation of the conventional voltage source ...
A boost converter-based ringing circuit with high-voltage gain for unipolar pulse generation
(
Institute of Electrical and Electronics Engineers Inc.
, 2016 , Article)
High-Voltage pulse generators are commonly used in biotechnology, medicine, industrial applications, food processing and drinking water purification. The dc-dc boost converter has been used before in pulsed applications ...
Modular Multilevel Converter-Based Bipolar High-Voltage Pulse Generator with Sensorless Capacitor Voltage Balancing Technique
(
Institute of Electrical and Electronics Engineers Inc.
, 2016 , Article)
In order to generate bipolar high-voltage (HV) pulses across certain load from HV dc (HVdc) power supply, a voltage source inverter (VSI) stage should be inserted between the load and the supply. In order to meet the ...
Multi-module high voltage pulse generator based on DC-DC boost converter and CDVMs for drinking water purification
(
Institute of Electrical and Electronics Engineers Inc.
, 2016 , Conference Paper)
High pulsed electric field (PEF) can be used effectively in drinking water purification, by applying it across the water sample to be treated. Application of sufficient high PEF guarantees killing of harmful germs and ...
A non-isolated quasi-Z-source-based high-gain DC-DC converter
(
John Wiley and Sons Ltd
, 2022 , Article)
To overcome the problems associated with Z-source-based DC-DC converters, a quasi-Z-source (QZS)-based high-gain DC-DC boost converter with switched capacitors is proposed in this work. Z-source-based DC-DC converters have ...
A hybrid switched inductor with flexible high voltage gain boost converter for DC micro-grid application
(
John Wiley and Sons Inc
, 2021 , Article)
A hybrid switched inductor with flexible high voltage gain boost converter for 400 V DC microgrid application is presented in the paper. The three operating modes of the converter are controlled using three switches by ...