Search
Now showing items 221-230 of 424
Effect of cultivation parameters and heat management on the algae species growth conditions and biomass production in a continuous feedstock photobioreactor
(
Elsevier Ltd
, 2020 , Article)
The sunshine heat flux is having an essential impact on the photobioreactor system temperature. However, optimal algae growth rates have gained if the algal growth media temperature located between 25 and 30 °C, for most ...
Investigation of various Mg(x)Fe(1−x)2O4 (x = 0.1, 0.5 and 0.9) nanostructures as a resistive and flexible LPG sensor
(
Elsevier Ltd
, 2020 , Article)
This report talks in detail about the successful synthesis of nanoparticle material Mg(x)Fe(1−x)2O4 (x = 0.1, 0.5 and 0.9) through a simple and inexpensive sol-gel auto-combustion process and its application as a gas sensor. ...
Plasticizer enhancement on the miscibility and thermomechanical properties of polylactic acid-chitin-starch composites
(
MDPI AG
, 2020 , Article)
In previous research, a polylactic chitin starch composite was prepared without the use of a solvent to enhance the miscibility. In this study, a polylactic acid (PLA) chitin starch composite was produced with chloroform ...
Structural, wear and thermal behaviour of Cu–Al2O3–graphite hybrid metal matrix composites
(
SAGE Publications Ltd
, 2020 , Article)
The aim of the present study is to investigate the structural, wear and thermal behaviour of Cu–Al2O3–graphite hybrid metal matrix composites. Copper matrix composites with Al2O3–graphite reinforcement (0.5-0.5, 1.0-1.0, ...
Dynamic mechanical analysis and broadband electromagnetic interference shielding characteristics of poly (vinyl alcohol)-poly (4-styrenesulfonic acid)-titanium dioxide nanoparticles based tertiary nanocomposites
(
Taylor and Francis Inc.
, 2020 , Article)
Novel tertiary nanocomposite films comprising of poly (vinyl alcohol) (PVA), poly (4-styrenesulfonic acid) (PSSA) and titanium dioxide (TiO2) nanoparticles (NPS) were prepared using simple solvent casting method. The ...
Phase, microstructure and tensile strength of Al–Al2O3–C hybrid metal matrix composites
(
SAGE Publications Ltd
, 2020 , Article)
The aim of the present study is to investigate the effect of alumina (Al2O3)–carbon (C) reinforcement on the properties of aluminium matrix. Aluminium matrix reinforced with Al2O3–carbon (2.5, 5, 7.5 and 10 wt.%) in equal ...
Enhanced LPG Sensitivity for Electron Beam Irradiated Al-ZnO Nanoparticles
(
Wiley-VCH Verlag
, 2020 , Article)
Al doped and un-doped ZnO thin films are coated on glass substrate by successive ionic layer adsorption and reaction technique with varying doping concentrations of Al from 3 to 7 at%. The samples are annealed at 450 °C ...
Enhanced corrosion protection of Epoxy/ZnO-NiO nanocomposite coatings on steel
(
MDPI AG
, 2020 , Article)
ZnO-NiO nanocomposite with epoxy coating on mild steel has been fabricated by the sol–gel assisted method. The synthesized sample was used to study corrosion protection. The analysis was performed by electrochemical impedance ...
Fabrication of zno-fe-mxene based nanocomposites for efficient co2 reduction
(
MDPI
, 2020 , Article)
A ZnO-Fe-MXene nanocomposite was fabricated and examined with diverse spectroscopic techniques. The hexagonal structure of ZnO, MXene, and ZnO-Fe-MXene nanocomposites were validated through XRD. FTIR showed the characteristic ...
Evaluating preparedness of emergency trainees to triage victims of mass casualty incidents
(
Hamad bin Khalifa University Press (HBKU Press)
, 2020 , Article)
Background: Triage of victims in mass casualty incidents (MCI) is crucial in prioritizing care and allocating resources1. Triage skills are important to be evaluated for training and better preparedness. Using clinical ...