بحث بسيط
السجلات المعروضة 1 -- 10 من 16
Effect of surfactant and radiation treatment on the morphology and properties of PP/EG composites
(
Springer
, 2015 , Article)
The effects of surfactant and electron beam (EB) radiation treatment on the morphology and properties of polypropylene (PP)/expanded graphite (EG) composites were investigated. Surfactant treatment and sonication of
EG ...
Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
(
Springer
, 2016 , Article)
This paper reports on the morphologies of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites prepared by melt compounding with various MCM-41 contents in the range of 0.1–5 wt%, the interactions between ...
Effect of layered silicates on the thermal stability of PCL/PLA microfibrillar composites
(
Elsevier
, 2016 , Article)
This paper reports on an investigation of the influence of the presence of two different clays, Cloisite 15A
and Cloisite 30B, and fibre drawing on the degradation behaviour and kinetics of PCL/PLA composites. It
was ...
Prediction of the mechanical properties of copper powder-filled low-density polyethylene composites. A comparison between the ANN and theoretical models
(
Begell House
, 2015 , Article)
In the present study, the mechanical properties of copper (Cu) powder-filled low-density polyethylene
(LDPE) composites are predicted by using artificial neural networks (ANNs) as a function of
the filler concentration. ...
Synergistic effect of expanded graphite, diammonium phosphate and Cloisite 15A on flame retardant properties of EVA and EVA/wax phase change blends
(
Springer
, 2015 , Article)
The influence of the introduction of expanded graphite (EG), as well as combinations of EG with Cloisite 15A clay and diammonium phosphate (DAP), into EVA and an EVA/wax blend on the thermal stability and flammability of ...
Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
(
Springer
, 2015 , Article)
The morphology, thermal stability and thermal degradation kinetics of melt-mixed poly(hydroxybutyrateco-valerate) (PHBV)/poly(e-caprolactone) (PCL) blends filled with small amounts of titanium(IV)oxide (TiO2) nanoparticles ...
Properties and thermo-switch behaviour of LDPE mixed with carbon black, zinc metal and paraffin wax
(
Springer Verlag
, 2017 , Article)
This paper reports on the presence of wax and radiation-induced crosslinking on the morphology, thermal and mechanical properties, as well as electrical conductivity and thermo-switch properties of LDPE containing ...
The influence of paraffin wax addition on the isothermal crystallization of LLDPE
(
Wiley
, 2016 , Article)
The influence of paraffin wax addition on the isothermal crystallization kinetics of linear low density polyethylene (LLDPE) was studied in a temperature range where the wax was always in the molten state and could be ...
Investigation of the physico-mechanical properties of electrospun PVDF/cellulose nanofibers.
(
Wiley
, 2016 , Article)
The electro-activity and mechanical properties of PVDF depends mainly on the b-phase content and degree of crystallinity. In this study, cellulose fibers were used to improve these characteristics. This could be achieved ...
Electrospun PVDF graphene oxide composite fibre mats with tunable physical properties.
(
Springer Verlag
, 2016 , Article)
This article is aimed at a basic physical characterization of electrospun PVDF/graphene oxide (GO) composite non-woven fibre mats. The morphological characterization of the prepared fabrics was performed via SEM investigations. ...