Search
Now showing items 1-10 of 31
The influence of paraffin wax addition on the isothermal crystallization of LLDPE
(
Wiley
, 2016 , Article)
The influence of paraffin wax addition on the isothermal crystallization kinetics of linear low density polyethylene (LLDPE) was studied in a temperature range where the wax was always in the molten state and could be ...
Electrospun PVDF graphene oxide composite fibre mats with tunable physical properties.
(
Springer Verlag
, 2016 , Article)
This article is aimed at a basic physical characterization of electrospun PVDF/graphene oxide (GO) composite non-woven fibre mats. The morphological characterization of the prepared fabrics was performed via SEM investigations. ...
Effect of layered silicates on the thermal stability of PCL/PLA microfibrillar composites
(
Elsevier
, 2016 , Article)
This paper reports on an investigation of the influence of the presence of two different clays, Cloisite 15A
and Cloisite 30B, and fibre drawing on the degradation behaviour and kinetics of PCL/PLA composites. It
was ...
Electrospun alginate nanofibres impregnated with silver nanoparticles: Preparation, morphology and antibacterial properties
(
Elsevier
, 2017 , Article)
Abstract Silver nanoparticles are amongst the most valuable nanoparticles with interesting properties, such as a non-toxic nature and high antibacterial efficiency, making them applicable for tissue scaffold, protective ...
Investigation of the physico-mechanical properties of electrospun PVDF/cellulose nanofibers.
(
Wiley
, 2016 , Article)
The electro-activity and mechanical properties of PVDF depends mainly on the b-phase content and degree of crystallinity. In this study, cellulose fibers were used to improve these characteristics. This could be achieved ...
Synergistic effect of expanded graphite, diammonium phosphate and Cloisite 15A on flame retardant properties of EVA and EVA/wax phase change blends
(
Springer
, 2015 , Article)
The influence of the introduction of expanded graphite (EG), as well as combinations of EG with Cloisite 15A clay and diammonium phosphate (DAP), into EVA and an EVA/wax blend on the thermal stability and flammability of ...
Morphology and thermal degradation studies of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
(
Elsevier
, 2015 , Article)
The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blend nanocomposites with small amounts of TiO2 nanoparticles were investigated. The nanoparticles were mostly located ...
The effect of expanded graphite on the flammability and thermal conductivity properties of phase change material based on PP/wax blends
(
Springer
, 2015 , Article)
The study reports on the flammability, thermal stability, impact properties and thermal conductivity of shape-stabilized phase change materials based on a soft Fischer–Tropsch paraffin wax blended with polypropylene (PP). ...
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler.
(
Wiley
, 2015 , Article)
The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ...
Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
(
Springer
, 2015 , Article)
The morphology, thermal stability and thermal degradation kinetics of melt-mixed poly(hydroxybutyrateco-valerate) (PHBV)/poly(e-caprolactone) (PCL) blends filled with small amounts of titanium(IV)oxide (TiO2) nanoparticles ...