Search
Now showing items 1-9 of 9
Comparative Study on Gas-Sensing Properties of 2D (MoS2, WS2)/PANI Nanocomposites-Based Sensor
(
MDPI
, 2022 , Article)
NH3 is a highly harmful gas; when inhaled at levels that are too high for comfort, it is very dangerous to human health. One of the challenging tasks in research is developing ammonia sensors that operate at room temperature. ...
Improved properties of Al-Si3N4 nanocomposites fabricated through a microwave sintering and hot extrusion process
(
Royal Society of Chemistry
, 2017 , Article)
In this study, nano-sized Si3N4 (0, 0.5, 1.0 and 1.5 vol%)/Al composites were fabricated using a powder metallurgy method involving microwave sintering technique followed by hot extrusion. The influence of Si3N4 content ...
Review of Progress and Prospects in Research on Enzymatic and Non- Enzymatic Biofuel Cells; Specific Emphasis on 2D Nanomaterials
(
Bentham Science Publishers
, 2022 , Article)
Energy generation from renewable sources and effective management are two critical challenges for sustainable development. Biofuel Cells (BFCs) provide an elegant solution by combining these two tasks. BFCs are defined by ...
Morphology, interfacial interaction, and thermal degradation of polycarbonate/MCM-41 (nano)composites
(
Taylor & Francis
, 2017 , Article)
This article reports on the morphology, interfacial interaction, thermal stability, and thermal degradation kinetics of polycarbonate (PC)/mesoporous silica (MCM-41) composites with various MCM-41 contents, prepared by ...
Influence of the presence of medium-soft paraffin wax on the morphology and properties of iPP/silver nanocomposites
(
Budapest University of Technology
, 2015 , Article)
The aim of this study was to investigate the presence of wax, different Ag nanoparticle contents, and different cooling rates from the melt, on the morphology, thermal and electrical conductivity, and dynamic mechanical ...
Preparation of multiphase poly(styrene-co-butyl acrylate)/wax-clay nanocomposites via miniemulsion polymerization
(
AD Publications
, 2015 , Article)
In the presence of different wax-clay nanocomposites concentrations, poly(styrene-co-butyl acrylate) P(S-co-BA) copolymers were prepared via free-radical random copolymerization of styrene and butyl acrylate in miniemulsion. ...
Preparation and Preliminary Dielectric Characterization of Structured C-Thiol-Ene Polymer Nanocomposites Assembled Using the Thiol-Ene Click Reaction.
(
Multidisciplinary Digital Publishing Institute (MDPI)
, 2015 , Article)
Fullerene-containing materials have the ability to store and release electrical energy. Therefore, fullerenes may ultimately find use in high-voltage equipment devices or as super capacitors for high electric energy storage ...
Review on PCL, PBS, and PCL/PBS blends containing carbon nanotubes.
(
Budapest University of Technology and Economics
, 2018 , Article Review)
Biodegradable polymers received considerable attention due to their contribution in the reduction of environmental concerns and the realization that global petroleum resources are finite. The development of double crystalline ...
Morphology, nucleation, and isothermal crystallization kinetics of poly(butylene succinate) mixed with a polycarbonate/MWCNTs masterbatch
(
MDPI
, 2018 , Article)
In this study, nanocomposites were prepared by melt blending poly(butylene succinate) (PBS) with a polycarbonate (PC)/multi-wall carbon nanotubes (MWCNTs) masterbatch, in a twin-screw extruder. The nanocomposites contained ...