Search
Now showing items 1-6 of 6
Thermal and mechanical characterization of injection moulded high density polyethylene/paraffin wax blends as phase change materials
(
Elsevier Ltd
, 2014 , Article)
Thermal and mechanical properties of blends based on high density polyethylene and paraffin wax were investigated. The blends were prepared from 5 to 50vol. % of paraffin wax employing a twin-screw extruder. Thermal behaviour ...
Processing, characterization and modeling of recycled polypropylene/glass fibre/wood flour composites
(
Elsevier Ltd
, 2014 , Article)
Polypropylene (PP) is one of the most common thermoplastic materials in the world. There is a need to recycle the large amount of this used material. To overcome the environmental problems, related to the polymer waste, ...
Improved mechanical properties of recycled linear low-density polyethylene composites filled with date palm wood powder
(
Elsevier, Ltd
, 2014 , Article)
Recycled linear low-density polyethylene (RLLDPE) was blended with date palm wood powder to prepare composites in which the concentration of the filler ranged from 10 to 70wt.%. The cross-linking of composites was performed ...
Improvement of ternary recycled polymer blend reinforced with date palm fibre
(
Elsevier, Ltd
, 2014 , Article)
This paper investigates the study and preparation of date palm fibre reinforced recycled polymer blend composites. This is the first paper which describes the recycled polymer ternary blends of (1) recycled low density ...
Microstructure evolution and mechanical properties of twinned AZ31 alloy plates at lower elevated temperature
(
Elsevier Ltd
, 2014 , Article)
The AZ31 alloy plates were pre-rolled at room temperature along the transverse direction to introduce extension twinning. The effect of pre-existing twins on the mechanical properties of AZ31 alloy plates at lower elevated ...
Grain refining and improving mechanical properties of a warm rolled AZ31 alloy plate
(
Elsevier B.V.
, 2014 , Article)
The mechanical properties of an AZ31 magnesium alloy were improved after warm rolling. The study involved a pre-rolling condition in which the material consisted of twins, playing a key role in recrystallization grain ...