عرض بسيط للتسجيلة

المؤلفEhsan, Raza
المؤلفAhmad, Zubair
المؤلفAziz, Fakhra
المؤلفAsif, Muhammad
المؤلفAhmed, Ayyaz
المؤلفRiaz, Kashif
المؤلفBhadra, Jolly
المؤلفAl-Thani, Noora J.
تاريخ الإتاحة2023-01-16T04:55:25Z
تاريخ النشر2021-09-01
اسم المنشورSolar Energy
المعرّفhttp://dx.doi.org/10.1016/j.solener.2021.08.008
الاقتباسRaza, E., Ahmad, Z., Aziz, F., Asif, M., Ahmed, A., Riaz, K., ... & Al-Thani, N. J. (2021). Numerical simulation analysis towards the effect of charge transport layers electrical properties on cesium based ternary cation perovskite solar cells performance. Solar Energy, 225, 842-850.
الرقم المعياري الدولي للكتاب0038092X
معرّف المصادر الموحدhttps://www.sciencedirect.com/science/article/pii/S0038092X21006642
معرّف المصادر الموحدhttp://hdl.handle.net/10576/38404
الملخصIn the present study, the device modeling of inverted architecture based on ITO/HTL/perovskite absorber/ETL/Ag was performed using a one-dimensional solar cell capacitance simulation (SCAPS-1D) program. Initially, device performance was evaluated with the experimental reported structure (NiOx/Csx(MA0.17FA0.83)1-xPb(I0.83Br0.17)3/PCBM) to extract optimum parameters of each layer. Then, further optimization was carried out using a comparative study of six hole transport layers (HTLs) and six electron transport layers (ETLs). Among the investigated ETLs and HTLs, CuI (HTL) and CdZnS (ETL) were chosen due to their better performance. In addition, the parameters of the perovskite layer, such as thickness variation, defect density, and defect energy level, have been optimized to analyze the device performance. Similarly, doping concentrations of the perovskite, CuI, and CdZnS were varied, and their influence on device performance was examined. Results revealed that for an efficient inverted PSC design, a thickness of 600 nm of the perovskite is suitable. Moreover, the best-optimized values for defect density and defect energy level were found as 2.6 × 1013 cm−3 and 0.1 eV, respectively. Similarly, doping concentrations of 1017 cm−3 for the absorber, 1020 cm−3 for the CuI and CdZnS are the best-optimized values. With these optimized values, our results demonstrated a PCE of 22.99%.
راعي المشروعThis work was supported by the Qatar National Research Fund (QNRF, a member of the Qatar Foundation) under the NPRP award [grant number NPRP11S-1210–170080].
اللغةen
الناشرElsevier
الموضوعDevice simulation
Inverted perovskite solar cells
Doping concentration
Defect density
Charge transport layers
Triple (Cs/FA/MA) cation
العنوانNumerical simulation analysis towards the effect of charge transport layers electrical properties on cesium based ternary cation perovskite solar cells performance
النوعArticle
الصفحات842-850
رقم المجلد225
dc.accessType Open Access


الملفات في هذه التسجيلة

Thumbnail

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة