College of Engineering: المرسلات الحديثة
السجلات المعروضة 901 -- 920 من 8959
-
A New High Gain Active Switched Network-Based Boost Converter for DC Microgrid Application
( IEEE , 2021 , Article)This paper deals with an active switched inductor network-based high gain boost converter. By using less number of components in circuit topology, a higher gain in voltage can be attained at a small duty cycle value by ... -
FACTS control devices (Statcom, SSSC and UPFC) re-configuration techniques by PSIM/MATLAB
( IEEE , 2007 , Conference)This paper discusses comprehensively the dynamic performance of the FACTS control devices in multiple operations, hardware needed to complement the simulated models. This paper also presents the schematic and basic control ... -
Analog testing using Zero-Crossing technique
( IEEE , 2002 , Conference)The functional digital testing is defined as a black and white test according to N. Nagi et al.(1998) and B. Vinnakota(1998) by other words, it can determine faulty and non faulty boards. But the analog faults are not. The ... -
Triple-Switch DC-to-DC Converter for High-Voltage Boost Application-Revista
( Springer Science and Business Media Deutschland GmbH , 2021 , Conference)The presented manuscript gives a comparison of the recently proposed three-switch three-mode (TSTM-HS) and dual-duty three-mode (DDTM) DC-to-DC converters. DC microgrid is the easiest, fail-safe, economical, expandable, ... -
MultiResUNet3+: A Full-Scale Connected Multi-Residual UNet Model to Denoise Electrooculogram and Electromyogram Artifacts from Corrupted Electroencephalogram Signals
( MDPI , 2023 , Article)Electroencephalogram (EEG) signals immensely suffer from several physiological artifacts, including electrooculogram (EOG), electromyogram (EMG), and electrocardiogram (ECG) artifacts, which must be removed to ensure EEG's ... -
Restoration of motion-corrupted EEG signals using attention-guided operational CycleGAN
( Elsevier , 2024 , Article)Electroencephalogram (EEG) signals suffer substantially from motion artifacts even in ambulatory settings. Signal processing techniques for removing motion artifacts from EEG signals have limitations, and the potential of ... -
GearFaultNet: Novel Network for Automatic and Early Detection of Gearbox Faults
( IEEE , 2024 , Article)Electrical and mechanical equipment with rotating parts often face the challenge of early breakdown due to defects in the gears or rolling bearings. Automated industrial systems can be significantly impeded by this type ... -
A Multi-Input Multi-Output Model Predictive Direct Torque Control for Dual Mechanical Port Machine
( IEEE , 2023 , Article)In this paper, a multi-input multi-output (MIMO) model predictive direct torque control (MPDTC) strategy for a dual mechanical port machine (DMPM) is proposed. A MIMO state space model is developed, incorporating the ... -
Reducing Force Ripples and Enhancing Reliability in LSRMs Through Modern Structure and Advanced Control Systems
( IEEE , 2024 , Article)Linear switched reluctance motors (LSRMs) are highly popular due to their simple and robust structure, affordable pricing, and ability to operate at high efficiency. However, a major drawback of these motors is the high ... -
Control of a Linear Switched Reluctance Motor in Electric Train Application
( IEEE , 2023 , Conference)Linear electrical motors are good candidates for the industries with linear motion. The use of rotational electrical motors in linear movements, require additional mechanical converters, which in addition to reducing system ... -
Audio-visual feature fusion for speaker identification
( Springer , 2012 , Conference)Analyses of facial and audio features have been considered separately in conventional speaker identification systems. Herein, we propose a robust algorithm for text-independent speaker identification based on a decision-level ... -
Speaker identification using multimodal neural networks and wavelet analysis
( Institution of Engineering and Technology , 2015 , Article)The rapid momentum of the technology progress in the recent years has led to a tremendous rise in the use of biometric authentication systems. The objective of this research is to investigate the problem of identifying a ... -
3D Gaussian Descriptor for Video-based Person Re-Identification
( Vaclav Skala Union Agency , 2019 , Conference)Despite being often considered less challenging than image-based person re-identification (re-id), video-based person re-id is still appealing as it mimics a more realistic scenario owing to the availability of pedestrian ... -
Mechanical characteristics of ultra-high performance steel FRC made with recycled concrete aggregates
( American Institute of Physics Inc. , 2023 , Conference)Recycled concrete aggregates (RCA) are increasingly becoming a sustainable alternative to natural aggregate (NA) for concrete applications. This study, therefore, tests the influence of RCA on the fresh and hardened ... -
Mechanical Characteristics and Durability of Concrete Made with Treated Domestic Wastewater and Recycled Concrete Aggregates
( East Carolina University , 2022 , Conference)Massive amounts of fresh water and natural aggregates are annually used for concrete applications, resulting in a rapid depletion of freshwater and natural aggregate resources. This necessitates the need of replacing fresh ... -
Experimental and numerical investigation of the flexural behavior of one-way RC slabs strengthened with near-surface mounted and externally bonded systems
( Elsevier , 2024 , Article)This study investigated the flexural performance of one-way reinforced concrete (RC) slabs strengthened with two distinct strengthening systems: near-surface mounted (NSM) bars and externally bonded (EB) carbon fiber-reinforced ... -
Flexural Behavior of Basalt Fiber-Reinforced Concrete Slab Strips with BFRP Bars: Experimental Testing and Numerical Simulation
( American Society of Civil Engineers (ASCE) , 2020 , Article)This study investigated the flexural behavior of a new one-way concrete slab system reinforced longitudinally with basalt fiber-reinforced polymer (BFRP) bars and cast with basalt fiber-reinforced concrete (BFRC). The study ... -
Explainable machine learning-aided efficient prediction model and software tool for bond strength of concrete with corroded reinforcement
( Elsevier , 2024 , Article)The bond strength between concrete and reinforcement is crucial for the composite action and serviceability of reinforced concrete (RC) structures. However, it is vulnerable to deterioration from the corrosion of reinforcement ... -
Flexural strengthening of one-way reinforced concrete slabs using near surface-mounted BFRP bars
( Elsevier , 2024 , Article)This study examines the flexural behavior of reinforced concrete (RC) one-way slabs strengthened with near-surface mounted (NSM) basalt fiber-reinforced polymer (BFRP) bars. Ten RC slabs were subjected to four-point loading ... -
The Influence of Reinforcement Ratio on the Shear Behaviour of Sand Coated Basalt FRP Bars Reinforced Beams
( Springer Science and Business Media Deutschland GmbH , 2022 , Conference)Qatar is known by its harsh corrosive environment that is represented by high periodical humidity, and dust accompanied by temperature fluctuation. Also, geographically Qatar is considered a peninsula, this in turn makes ...
