Show simple item record

AuthorAlali, Weaam
AuthorSaffour, Ziad
AuthorSaloum, Saker
Available date2024-01-21T09:21:45Z
Publication Date2024
Publication NameThe Sixth Youth Research Forum 2024
CitationAlali, Weaam., Saffour, Ziad., Saloum, Saker., "Water-Repellent Finish on Cotton Fabric by Plasma technique Using Sulfur Hexafluoride SF6. ",The Sixth Youth Research Forum 2024,2023,Qatar University Young Scientists Center - Qatar University
URIhttp://hdl.handle.net/10576/50974
AbstractIn order to make cotton fabric resistant to water, a radio-frequency plasma system was utilized to treat the fabric with SF6 etching at a low pressure of 0.5 mbar and a flow rate of 200 sccm. The efficacy of the water-repellent treatment was evaluated via the fabric's water contact angle, as well as its impact on surface morphology and mechanical properties. Results indicate that the treatment was successful in enhancing water repellency, with improvements observed throughout the treatment period. It was discovered that optimal water repellency can be achieved in just one minute of etching, without negatively affecting the fabric's properties. However, increasing the treatment time to 5 and 10 minutes had a negative impact on the fabric's tensile strength.
Languageen
PublisherQatar University Young Scientists Center - Qatar University
SubjectCotton fabric
Etching
Plasma
Sulfur Hexafluoride
Water-repellency
TitleWater-Repellent Finish on Cotton Fabric by Plasma technique Using Sulfur Hexafluoride SF6
TypeConference Paper
Medical Subject Headings


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record