Show simple item record

AuthorPaurobally, Mohammad Roshun
AuthorSassi, Sadok
AuthorRenno, Jamil
Available date2024-02-29T08:23:37Z
Publication Date2019-01-01
Publication NameProceedings of the 26th International Congress on Sound and Vibration, ICSV 2019
ISBN9781999181000
URIhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85084016585&origin=inward
URIhttp://hdl.handle.net/10576/52481
AbstractVentilation ducts are often lined with passive absorption material for both thermal insulation and noise and vibration reduction. However, the noise reduction performance is not significant at low frequencies. Active Noise Control (ANC) on the other hand can be used in controlling low frequency noise in ducts effectively. This paper presents the main results obtained from the development of an active noise control system for ventilation noise using two approaches. A comparison between the performance of an adaptive feedforward control algorithm and a regenerated reference adaptive algorithm shows that both algorithms provide good noise reduction. Experimental results in the laboratory show that adequate active noise reduction occurs in the frequency range between 100 Hz to 300Hz. The noise attenuation of 20 dB or more for tonal noise can be achieved. The system is also tested in an actual classroom where noise reduction from the ventilation duct is controlled. The results show that the tonal component can be attenuated successfully and a quiet zone achieved in the classroom with a single channel control system
Languageen
PublisherCanadian Acoustical Association
SubjectActive noise control
Ventilation noise
TitleActive control of noise in ventilation ducts
TypeConference Paper
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record