عرض بسيط للتسجيلة

المؤلفMohamed, Fahd M.
المؤلفEljack, Fadwa T.
المؤلفAhmed, Samer F.
المؤلفGhani, Saud A.
تاريخ الإتاحة2024-03-25T09:35:11Z
تاريخ النشر2021-10-25
اسم المنشورJournal of Energy Resources Technology, Transactions of the ASME
المعرّفhttp://dx.doi.org/10.1115/1.4052613
الاقتباسMohamed, F. M., Eljack, F. T., Ahmed, S. F., & Ghani, S. A. (2022). Investigating the Potential of Recycling Flare-Source Hydrocarbon Gases in an Industrial Burner. Journal of Energy Resources Technology, 144(2), 022309.
الرقم المعياري الدولي للكتاب0195-0738
معرّف المصادر الموحدhttps://www.scopus.com/inward/record.uri?partnerID=HzOxMe3b&scp=85144824800&origin=inward
معرّف المصادر الموحدhttp://hdl.handle.net/10576/53452
الملخصFlare gas is considered a global environmental concern. Flaring contributes to wasting limited material and energy resources, economic loss, and greenhouse gas emissions. Utilizing flared gas as a fuel feed to industrial cracking furnaces grants advantages in terms of fuel economy and emissions reduction. This work presents the results obtained by ANSYS FLUENT simulation of a flare hydrocarbon gas utilized in a steam-cracking furnace of ethylene process when combusting hydrocarbons flare gas in a low-NOx burner. In addition, the study determined the suitability of different hydrocarbon fuel mixtures in satisfying the required adiabatic flame temperature. The flared stream is assumed to be inlet from both primary and secondary staged fuel burners. The simulation results illustrated the detailed temperature profiles along the furnace flue gas side. They also presented the influence of flare stream compositions and Wobbe Index (WI) on the temperature profile. It was found that having an alternative fuel with a heating value or WI similar to that of methane would not result in the same temperature profile of methane, as the current fuel source. In addition, using different excess air percentages has no linear effect on the burner's temperature profile. However, the results showed that the best replacement of methane, as the main fuel source, is a flare mixture with the same WI of methane as well as a certain H2 content needs to be added to every flare mixture composition to reach the same temperature profile of methane.
راعي المشروعThis paper was made possible by NPRP (Grant No. 10-0205-170347) from the Qatar National Research Fund (a member of the Qatar Foundation).
اللغةen
الناشرAmerican Society of Mechanical Engineers (ASME)
الموضوعair emissions from fossil fuel combustion
energy conversion/systems
hydrocarbon gases
industrial burner
recycling flare gases
العنوانInvestigating the Potential of Recycling Flare-Source Hydrocarbon Gases in an Industrial Burner
النوعArticle
رقم العدد2
رقم المجلد144
ESSN1528-8994
dc.accessType Abstract Only


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة