Show simple item record

AuthorShawki, G. S. A.
Available date2009-11-25T13:07:26Z
Publication Date1989
Publication NameEngineering Journal of Qatar University
CitationEngineering Journal of Qatar University, 1989, Vol. 2, Pages 91-115.
URIhttp://hdl.handle.net/10576/8032
AbstractThis paper deals with the strength of grey cast iron components subjected to combined bending and tension, this case of loading being met in C-frames and clamps, crane hooks and various eccentrically—loaded protruding machine parts. Specimens of rectangular as well as trapezoidal sections, made of flake graphite cast iron, were tested under conditions of eccentric loading. With due consideration of non-linearities and inequalities in stress-strain relations in tension and compression, stress distribution for these sections was obtained from strain measurements. The ratio of bending to tensile stress components is herein shown to play a significant role in locating the neutral plane and in identifying the dominating failure stress. The value 2, for this ratio, is shown to draw some demarkation border between the two modes of fracture encountered in the tests. The apparent superiority of bending strength over tensile strength is herein attributed to the widely differing stress-strain relations in tension and compression.
Languageen
PublisherQatar University
SubjectApplied Mechanics
TitleBehaviour of Grey Cast Iron Under Combined Bending and Tension
TypeArticle
Pagination91-115
Volume Number2
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record