Show simple item record

AuthorKandeil, A. Y.
Available date2009-11-25T13:07:32Z
Publication Date1989
Publication NameEngineering Journal of Qatar University
CitationEngineering Journal of Qatar University, 1989, Vol. 2, Pages 77-87.
URIhttp://hdl.handle.net/10576/8037
AbstractA study has been conducted on the volumetric wear and wear rate as well as the quality of the surfaces produced by rubbing brass and steel specimens. Effect of end pressure and total sliding distance between the two rubbed surfaces on both the surface parameters and the material wear rate have been investigated. The surface parameters were measured using a (Talysurf-5) surface analyzer while wear rate values were obtained using a (pin and disk) type wear and friction testing machine. Experiments were conducted at disk speed of (102 rpm) for pin end pressure values between 2 and 12 bars. Experimental results have been analyzed on an IBM-XT computer using SPSS-PC statistical package. The analyses revealed significant influence of the pin end pressure and the total sliding distance on the wear, wear rate and the roughness of the produced surface. Three regression equations representing those relations were deriven and the corresponding conclusions were drawn.
Languageen
PublisherQatar University
SubjectEngineering Materials
TitleInvestigation of In-Service Parameters Influencing the Wear and Wear Rate for Two Rubbing Surfaces
TypeArticle
Pagination77-87
Volume Number2
dc.accessType Open Access


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record