Electrospun Copolyamide Mats Modified by Functionalized Multiwall Carbon Nanotubes
المؤلف | Sobolciak P. |
المؤلف | Tanvir A. |
المؤلف | Popelka A. |
المؤلف | Spitalsky Z. |
المؤلف | Mrlik M. |
المؤلف | Krupa I. |
تاريخ الإتاحة | 2020-04-25T01:02:19Z |
تاريخ النشر | 2019 |
اسم المنشور | Polymer Composites |
المصدر | Scopus |
الرقم المعياري الدولي للكتاب | 2728397 |
الملخص | In this article, we report the preparation and properties of electro-conductive mats based on the commercial copolyamide (Vestamelt X1010) and multiwall carbon nanotubes functionalized by amino groups. Vestamelt X1010 is easily soluble in n-propanol at room temperature up to a concentration of 18 wt%. This is a significant advantage of this system because n-propanol is considered to be a safe and relatively environmentally friendly solvent compared with the organic solvents and acids frequently used for electrospinning of common synthetic polymers. The co-polyamide nanofibers were modified by multiwall carbon nanotubes grafted by amino groups to enhance their electrical conductivity at low filler content. The percolation threshold was found to be 0.33 vol%. Some applications of these mats were demonstrated such as the capability for sensing a selected vapor (acetone) and for oil/water separation. It was shown that neat Vestamelt X1010 mats remove around 85 wt% of oil (100 ppm of vegetable oil dispersed in water), whereas the addition of 1 wt% of CNTs enhances this ability up to 95 wt%. POLYM. COMPOS., 40:E1451-E1460, 2019. |
راعي المشروع | This work was made possible by NPRP grant No.: 7-1724-3-438 from the Qatar National Research Fund (A Member of the Qatar Foundation). |
اللغة | en |
الناشر | John Wiley and Sons Inc. |
الموضوع | Electrospun Copolyamide Multiwall Carbon Nanotubes |
النوع | Article |
الصفحات | E1451-E1460 |
رقم العدد | S2 |
رقم المجلد | 40 |
الملفات في هذه التسجيلة
الملفات | الحجم | الصيغة | العرض |
---|---|---|---|
لا توجد ملفات لها صلة بهذه التسجيلة. |
هذه التسجيلة تظهر في المجموعات التالية
-
الأبحاث [1356 items ]