عرض بسيط للتسجيلة

المؤلفManasrah, Abdallah D.
المؤلفAl-Mubaiyedh, Usamah A.
المؤلفLaui, Tahar
المؤلفBen-Mansour, Rached
المؤلفAl-Marri, Mohammed J.
المؤلفAlmanassra, Ismail W.
المؤلفAbdala, Ahmed
المؤلفAtieh, Muataz A.
تاريخ الإتاحة2021-07-05T11:03:41Z
تاريخ النشر2016
اسم المنشورApplied Thermal Engineering
المصدرScopus
معرّف المصادر الموحدhttp://dx.doi.org/10.1016/j.applthermaleng.2016.07.026
معرّف المصادر الموحدhttp://hdl.handle.net/10576/21181
الملخصEnhancing heat transfer in thermal fluid systems can contribute significantly towards the improvement of thermal efficiency resulting in reducing energy consumption and hence carbon emission. Conventional fluids like water and oil have limited heat transfer potential. The need for the development of new classes of fluids with enhanced heat transfer properties is thus becoming essential. Many studies have developed nanofluids using nanoparticles, however, they showed a limited enhancement in heat transfer. This study investigated the heat capacity, enhancement of heat transfer, viscosity, and pressure drop of nanofluids with carbon nanotubes (CNTs) and CNTs doped with iron oxide nanoparticles (Fe2O3-CNT). The surfaces of carbon nanotubes were doped with 1 wt.% and 10.0 wt.% iron oxide nanoparticles. The pristine and doped CNTs were used to prepare heat-exchange nanofluids with additive concentrations of 0.01, 0.05, and 0.10 wt.%. A shell and tube heat exchanger was used to evaluate the overall heat transfer coefficient and the associated pressure. The specific heat capacity of the nanofluids was measured by differential scanning calorimetry (DSC). The results showed that the specific heat capacity of the nanofluids with undoped and doped CNTs is significantly higher than that of pure water by about 10% and 55%, respectively. The heat transfer rate of the nanofluids increased sharply with the CNT dosage the iron nanoparticles loading and reached up to 55% enhancement with doped CNTs. We observed that the power required to exchange 1.8 kW heat using nanofluid containing 0.1 wt.% of 10 wt.% Fe2O3-CNTs was 20 times lower than the power required to exchange the same amount of heat using water. This is because the iron nanoparticles enhanced the dispersion of the CNTs and increased their heat capacity and thermal conductivity. Compared with that of pure water, the encountered pressure drop of the nanofluid at the same flow rate was almost unchanged, resulting in no extra pumping energy penalty.
راعي المشروعThe authors would like to acknowledge the support provided by King Abdulaziz City for Science and Technology (KACST) through Science and Technology Unit at King Fahd University of Petroleum and Minerals (KFUPM) for funding this work through project No: 09-NAN758-04 titled Experimental Investigation of Heat Transfer Characterization for CNT-Nanofluid in Heat Exchangers as part of the National Science Technology and Innovation Plan (NSTIP).
اللغةen
الناشرElsevier Ltd
الموضوعHeat capacity
Impregnated carbon nanotube
Nanofluid
Nanoparticles
Pressure drop
Shell and tube heat exchanger
العنوانHeat transfer enhancement of nanofluids using iron nanoparticles decorated carbon nanotubes
النوعArticle
الصفحات1008-1018
رقم المجلد107
dc.accessType Abstract Only


الملفات في هذه التسجيلة

الملفاتالحجمالصيغةالعرض

لا توجد ملفات لها صلة بهذه التسجيلة.

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة