Show simple item record

AuthorAhmad, Javed
AuthorSiddique, Marif Daula
AuthorSarwar, Adil
AuthorLin, Chang Hua
AuthorIqbal, Atif
Available date2022-02-27T05:38:26Z
Publication Date2021
Publication NameInternational Journal of Circuit Theory and Applications
ResourceScopus
ISSN0098-9886
URIhttp://dx.doi.org/10.1002/cta.3129
URIhttp://hdl.handle.net/10576/27418
AbstractA noninverting DC-DC converter with high voltage gain and low voltage stress on the switches for industrial applications is proposed in this research article. The proposed converter has used a voltage multiplier cell twice in the circuit that gives the proposed converter a symmetrical configuration and provides low voltage stress across both the switches. The symmetrical configuration of the proposed converter makes it easier to select the components. The proposed converter provides a voltage gain that is more than three times of the conventional boost converter. A 200-W hardware prototype of the proposed converter has been developed and tested under continuous conduction for static and dynamic conditions. The power loss analysis is done using PLECS software by incorporating the real parameters of switches and diodes from the datasheet. The converter performance is found to be good in open-loop conditions and is in agreement with the theoretical analysis.
SponsorThis work was supported by the Qatar University-Marubeni Concept to Prototype Development Research grant # [MCTP-CENG-2020-2] from the Qatar University.
Languageen
PublisherJohn Wiley and Sons Ltd
Subjectboost converter
high voltage gain
industrial applications
voltage multiplier cell
voltage stress
TitleA high gain noninverting DC-DC converter with low voltage stress for industrial applications
TypeArticle
Pagination4212-4230
Issue Number12
Volume Number49
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record