عرض بسيط للتسجيلة

المؤلفBhosale, Rahul Rambhau
المؤلفKumar, Anand
المؤلفAlmomani, Fares
المؤلفGhosh, Ujjal
المؤلفScheffe, Jonathan
المؤلفGupta, Ram
المؤلفAlnouss, Ahmed
المؤلفAnis, Mohammad Saad
المؤلفUsmani, Mohammad Hamza Ahmed
تاريخ الإتاحة2022-03-17T05:31:19Z
تاريخ النشر2016
اسم المنشورQatar Foundation Annual Research Conference Proceedings
المصدرqscience
الاقتباسBhosale RR, Kumar A, Almomani F, Ghosh U, Scheffe J, Gupta R, Alnouss A, Anis MS, Usmani MHA. (2016). Reactive Absorption of CO2 Using Ethylaminoethanol Promoted Aqueous Potassium Carbonate Solvent. Qatar Foundation Annual Research Conference Proceedings 2016: EEPP3273 http://dx.doi.org/10.5339/qfarc.2016.EEPP3273.
الرقم المعياري الدولي للكتاب2226-9649
معرّف المصادر الموحدhttps://doi.org/10.5339/qfarc.2016.EEPP3273
معرّف المصادر الموحدhttp://hdl.handle.net/10576/28242
الملخصAtmospheric concentration of CO2, which is considered as one of the major greenhouse gases (GHGs), has increased up to 398 ppmv as of 2015. CO2 concentration in atmosphere was 280 ppmv in pre-industrial era, and due to the continuous discharge, it is expected to increase up to 550 ppmv by 2050. Many of the major industrial sources of CO2 emissions are natural gas fired power plants, synthesis gas used in integrated gasification combined cycle (IGCC) and power generation, gas streams produced after combustion of fossil fuels or other carbonaceous materials, and oxyfuels. Reactive absorption of CO2 from the industrial off gases by using chemical solvents is considered as one of the most common, efficient, and cost effective technologies utilized by the industry for CO2 capture. The captured CO2 can be stored by using the geological or oceanic sequestration approaches. As an alternative to geological or oceanic sequestration, the captured CO2 can be re-energized into CO by using solar energy and combined with H2, which can be generated from different methods, to produce syngas. The syngas produced can be further processed to liquid fuels such as methanol, gasoline, jet fuel, etc. via the catalytic Fischer-Tropsch process. In past, a variety of chemical solvents (mostly aqueous amines and there derivatives) have been used for CO2 capture from different gaseous streams via reactive absorption. Though the amines are attractive for the CO2 capture application, there are several disadvantages such as very strong corrosion to equipment and piping, high energy requirement during the stripping of CO2 and they are prone to oxidative and thermal degradation. Recently, use of aqueous potassium carbonate (K2CO3) as a solvent for the absorption of CO2 has gained widespread attention. The usage of K2CO3 has been employed in a number on industries for the removal of CO2 and H2S. Due to its high chemical solubility of CO2, low toxicity and solvent loss, no thermal and oxidative degradation, low heat of absorption, and absence of formation of heat stable salts, K2CO3 seems to be more attractive compared to the conventional amines towards CO2 capture. However, K2CO3 solvent shows slow rate of reaction with CO2 and, consequently, low mass transfer in the liquid phase as compared to the amine solvents. Hence, several investigators are focused towards improving the rate of reaction of CO2 in K2CO3 solvent with the help of different types of promoters. In this paper, the kinetics of absorption of CO2 into an aqueous K2CO3 (20 wt %) promoted by ethylaminoethanol (EAE) solution (hereafter termed as APCE solvent) was studied in a glass stirred cell reactor using a fall in pressure method. Reactive absorption of CO2 in EAE promoted aqueous K2CO3 solution (APCE solvent) was studied at different initial EAE concentrations (0.6 to 2 kmol/m3) and reaction temperatures (303 to 318 K). The reaction between the CO2 and APCE solvent was very well represented by the zwitterion mechanism. The N2O analogy was employed for the determination of H_(CO2) in the APCE solvent. The H_(CO2) was observed to be decreased by 5 and 31% due to the increase in the EAE concentration from 0.6 to 2 kmol/m3 and reaction temperature from 303 to 318 K, respectively. The D_(CO2) in the APCE solvent was also decreased by 21% due to the similar increase in the initial EAE concentration. In contrast, the D_(CO2) increased with the rise in the reaction temperature from 303 to 318 K by a factor of 1.678. The rate of absorption of CO2 in the APCE solvent was observed to increase by 35.10% and 47.59% due to the increase in EAE concentration (0.6 to 2 kmol/m3) and reaction temperature (303 to 318 K). The absorption kinetics was observed to be of overall second order i.e. first order with respect to both CO2 and EAE concentrations, respectively. The rate constant (k_2) for the absorption of CO2 in the APCE solvent was observed to be equal to 45540 m3/kmol√s at 318 K. The temperature dependency of k_2 for the CO2 – APCE solvent system was experimentally determined as: k_2 = (1.214 × [10]^18)√exp(( − 9822.7)/T). Findings of this study indicate EAE as a promising promoter for the aqueous K2CO3 solution.
اللغةen
الناشرHamad bin Khalifa University Press (HBKU Press)
الموضوعAtmospheric
CO2
Atmospheric concentration of CO2
العنوانReactive Absorption of CO2 Using Ethylaminoethanol Promoted Aqueous Potassium Carbonate Solvent
النوعConference Paper
رقم العدد1
رقم المجلد2016
dc.accessType Open Access


الملفات في هذه التسجيلة

Thumbnail

هذه التسجيلة تظهر في المجموعات التالية

عرض بسيط للتسجيلة