Show simple item record

AuthorTouati A.
AuthorAbdaoui A.
AuthorTouati F.
AuthorKhandakar A.
AuthorBouallegue A.
Available date2022-05-22T11:03:07Z
Publication Date2017
Publication NameProceedings of SPIE - The International Society for Optical Engineering
ResourceScopus
Identifierhttp://dx.doi.org/10.1117/12.2249629
URIhttp://hdl.handle.net/10576/31442
AbstractIn order to distinguish the most rigorous model, we made a comparison between measurements data and the mostly used empirical models. These models use the visibility as a basic parameter to predict the fog attenuation. In order to measure the visibility, we used a laser lamp of 532 nm and two light sensors. The experimental set up is composed of a fog machine and two KORUZA terminals operating at 1310 nm and 1550 nm, respectively. Every one minute, the measured attenuation is averaged to one value then compared to the attenuation calculated based on measured visibility and according to the empirical models cited previously.
Languageen
PublisherSPIE
SubjectVisibility
1550 nm
Basic parameters
Empirical model
Experimental set up
Fog attenuation
Indoor test
Light sensor
Rigorous model
Fog
TitleIndoor test of the fog's effect on FSO link
TypeConference Paper
Volume Number10096
dc.accessType Abstract Only


Files in this item

FilesSizeFormatView

There are no files associated with this item.

This item appears in the following Collection(s)

Show simple item record