Search

Now showing items 1-10 of 20

Synthesis and properties of HA/ZnO/CNT nanocomposite

Ding M.; Sahebgharani N.; Musharavati F.; Jaber F.; Zalnezhad E.; ... more authors ... less authors ( Elsevier Ltd , 2018 , Article)

The goal of this study was to examine the tribomechanical properties of hydroxyapatite (HA)/ZnO and HA/ZnO/CNT composite ceramics (carbon nanotubes; with different ratios 0.5 wt%, 1.0 wt%, and 1.5 wt%). The composites were ...

Differentiating the mechanical response of hierarchical magnesium nano-composites as a function of temperature

Habibi, Meisam K.; Qian, Min; Hamouda, Abdelmajid S.; Gupta, Manoj ( Elsevier, Ltd , 2012 , Article)

The effect of temperature change on quasi-static mechanical response of monolithic Mg alongside hierarchical Mg/Al–Al2O3 nano-composites synthesized through powder metallurgy route followed by microwave assisted rapid ...

Hierarchical honeycomb auxetic metamaterials

Mousanezhad, Davood; Babaee, Sahab; Ebrahimi, Hamid; Ghosh, Ranajay; Hamouda, Abdelmagid Salem; ... more authors ... less authors ( Nature Publishing Group , 2015 , Article)

Most conventional materials expand in transverse directions when they are compressed uniaxially resulting in the familiar positive Poisson’s ratio. Here we develop a new class of two dimensional (2D) metamaterials with ...

Effect of microwave sintering on the properties of copper oxide doped Y-TZP ceramics

Ramesh S.; Sara Lee K.Y.; Tan C.Y.; Wong Y.H.; Johnson Alengaram U.; ... more authors ... less authors ( Elsevier Ltd , 2018 , Article)

The effect of various amounts of copper oxide (CuO) up to 1 wt% on the densification behaviour and mechanical properties of 3 mol% yttria-tetragonal zirconia polycrystal (Y-TZP) were studied by using microwave (MW) sintering ...

Effect of hot extrusion and T6 heat treatment on microstructure and mechanical properties of Al-10Zn-3.5Mg-2.5Cu nanocomposite reinforced with graphene nanoplatelets

Mirjavadi S.S.; Alipour M.; Hamouda A.M.S.; Kord S.; Koppad P.G.; ... more authors ... less authors ( Elsevier Ltd , 2018 , Article)

Al-10Zn-3.5Mg-2.5Cu/graphene nanocomposites were developed by a combination of liquid metallurgy and hot extrusion techniques. The effect of varying graphene content (0.1%, 0.3%, 0.7% and 1.0%) on microstructure and ...

Comparison between microwave and conventional sintering on the properties and microstructural evolution of tetragonal zirconia

Ramesh S.; Zulkifli N.; Tan C.Y.; Wong Y.H.; Tarlochan F.; ... more authors ... less authors ( Elsevier Ltd , 2018 , Article)

In this research, the comparison between microwave sintering and conventional sintering on the mechanical properties and microstructural evolution of 3 mol% yttria-stabilised zirconia were studied. Green bodies were compacted ...

Using hierarchical composite approach to improve mechanical response of Mg and Mg–Bi2O3 nano-composites

Habibi, Meisam K.; Hamouda, Abdelmagid S.; Gupta, Manoj ( Elsevier, Ltd , 2013 , Article)

Novel Mg nano-composites reinforced with either Bi2O3 nano-particles or hybrid Al–Bi2O3 particles (Bi2O3 nano-particles hybridized with Al using ball milling) have been synthesized, in this work, through powder metallurgy ...

Effect of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites

Mattli, Manohar Reddy; Khan, Adnan; Matli, Penchal Reddy; Yusuf, Moinuddin; Ashraf, A. Al-; ... more authors ... less authors ( Elsevier Ltd , 2020 , Article)

This research work investigates the effect of concentration of Inconel625 particles on the microstructural, mechanical, and thermal properties of Al-Inconel625 composites. The Al-Inconel625 composites containing varying ...

Improving mechanical, thermal and damping properties of niti (Nitinol) reinforced aluminum nanocomposites

Matli, Penchal R.; Manakari, Vyasaraj; Parande, Gururaj; Mattli, Manohar R.; Shakoor, Rana A.; ... more authors ... less authors ( MDPI AG , 2020 , Article)

In the present study, Ni50Ti50 (NiTi) particle reinforced aluminum nanocomposites were fabricated using microwave sintering and subsequently hot extrusion. The effect of NiTi (0, 0.5, 1.0, and 1.5 vol %) content on the ...

Influence of TiO2 nanoparticles incorporation to friction stir welded 5083 aluminum alloy on the microstructure, mechanical properties and wear resistance

Mirjavadi, Seyed Sajad; Alipour, Mohammad; Emamian, Soheil; Kord, S.; Hamouda, A.M.S.; ... more authors ... less authors ( Elsevier , 2017 , Article)

The aim of the current study is to investigate the effect of addition of TiO2 nanoparticles and friction stir welding (FSW) parameter such as number of passes on microstructure, mechanical and tribological properties of ...