Center for Advanced Materials Research: المرسلات الحديثة
السجلات المعروضة 1281 -- 1300 من 1375
-
The influence of paraffin wax addition on the isothermal crystallization of LLDPE
( Wiley , 2016 , Article)The influence of paraffin wax addition on the isothermal crystallization kinetics of linear low density polyethylene (LLDPE) was studied in a temperature range where the wax was always in the molten state and could be ... -
Morphology and thermal degradation studies of melt-mixed PLA/PHBV biodegradable polymer blend nanocomposites with TiO2 as filler.
( Wiley , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(hydroxybutyrate-co-valerate) (PHBV) blends and nanocomposites with small amounts of TiO2 nanoparticles were investigated. PLA/PHBV at 50/50 ... -
Electrospun PVDF graphene oxide composite fibre mats with tunable physical properties.
( Springer Verlag , 2016 , Article)This article is aimed at a basic physical characterization of electrospun PVDF/graphene oxide (GO) composite non-woven fibre mats. The morphological characterization of the prepared fabrics was performed via SEM investigations. ... -
Investigation of the physico-mechanical properties of electrospun PVDF/cellulose nanofibers.
( Wiley , 2016 , Article)The electro-activity and mechanical properties of PVDF depends mainly on the b-phase content and degree of crystallinity. In this study, cellulose fibers were used to improve these characteristics. This could be achieved ... -
Influence of blending and blend morphology on the thermal properties and crystallization behaviour of PLA and PCL in PLA/PCL blends
( Springer , 2016 , Article)In this paper, we reported on the influence of PCL on the cold crystallization behaviour of PLA in different PLA/PCL blends, and on the influence of blending with PLA on the PCL crystallization behaviour and kinetics. The ... -
Preparation and characterisation of Ce:YAG -polycarbonate composites for white LED
( Elsevier , 2016 , Article)Ce:YAG-polycarbonate composites were prepared with several amounts of Ce:YAG in the range 0.1–5 wt.% by using melt compounding. The structure and morphology of the composites were investigated by means of X-ray diffractometry ... -
Morphology and properties of poly(methyl methacrylate) (PMMA) filled with mesoporous silica (MCM-41) prepared by melt compounding
( Springer , 2016 , Article)This paper reports on the morphologies of poly(methyl methacrylate) (PMMA)/mesoporous silica (MCM-41) composites prepared by melt compounding with various MCM-41 contents in the range of 0.1–5 wt%, the interactions between ... -
Effect of layered silicates on the thermal stability of PCL/PLA microfibrillar composites
( Elsevier , 2016 , Article)This paper reports on an investigation of the influence of the presence of two different clays, Cloisite 15A and Cloisite 30B, and fibre drawing on the degradation behaviour and kinetics of PCL/PLA composites. It was ... -
Monolayer polymer photocells. The opportunities
( Academy of Sciences and Arts of the Republic of Serbia , 2015 , Article)The conversion of solar energy into electricity is in the focus of a large number of scientists. Because of the problems caused by the use of fossil fuels, the use of renewable and environmentally friendly energy sources ... -
Preparation of multiphase poly(styrene-co-butyl acrylate)/wax-clay nanocomposites via miniemulsion polymerization
( AD Publications , 2015 , Article)In the presence of different wax-clay nanocomposites concentrations, poly(styrene-co-butyl acrylate) P(S-co-BA) copolymers were prepared via free-radical random copolymerization of styrene and butyl acrylate in miniemulsion. ... -
A review on electrospun bio-based polymers for water treatment
( Budapest University of Technology , 2015 , Article)Over the past decades, electrospinning of biopolymers down to nanoscale garnered much interest to address most of the millennia issues related to water treatment. The fabrication of these nanostructured membranes added a ... -
Editorial: Using thermogravimetric analysis to determine polymer thermal stability: Relevance of changes in onset temperature of mass loss
( Budapest University of Technology , 2015 , Article)Editorial -
Influence of the presence of medium-soft paraffin wax on the morphology and properties of iPP/silver nanocomposites
( Budapest University of Technology , 2015 , Article)The aim of this study was to investigate the presence of wax, different Ag nanoparticle contents, and different cooling rates from the melt, on the morphology, thermal and electrical conductivity, and dynamic mechanical ... -
The effect of expanded graphite on the flammability and thermal conductivity properties of phase change material based on PP/wax blends
( Springer , 2015 , Article)The study reports on the flammability, thermal stability, impact properties and thermal conductivity of shape-stabilized phase change materials based on a soft Fischer–Tropsch paraffin wax blended with polypropylene (PP). ... -
Effect of surfactant and radiation treatment on the morphology and properties of PP/EG composites
( Springer , 2015 , Article)The effects of surfactant and electron beam (EB) radiation treatment on the morphology and properties of polypropylene (PP)/expanded graphite (EG) composites were investigated. Surfactant treatment and sonication of EG ... -
Effect of surfactant and electron treatment on the electrical and thermal conductivity as well as thermal and mechanical properties of ehylene vinyl acetate/expanded graphite composites
( Wiley Periodicals, Inc , 2015 , Article)This study presents an investigation of the electrical and thermal conductivities of composites based on an ethylene vinyl acetate (EVA) copolymer matrix and nanostructured expanded graphite (EG). To improve the EG dispersion ... -
Morphology and thermal degradation studies of melt-mixed poly(hydroxybutyrate-co-valerate) (PHBV)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
( Springer , 2015 , Article)The morphology, thermal stability and thermal degradation kinetics of melt-mixed poly(hydroxybutyrateco-valerate) (PHBV)/poly(e-caprolactone) (PCL) blends filled with small amounts of titanium(IV)oxide (TiO2) nanoparticles ... -
Dynamic mechanical properties of PLA/PHBV, PLA/PCL, PHBV/PCL blends and their nanocomposites with TiO2 as nanofiller
( Elsevier , 2015 , Article)The effect of blending and the addition of small amounts of TiO2 nanoparticles on the dynamic mechanical properties of PLA/PHBV, PLA/PCL and PHBV/PCL blends is reported in this paper. The storage modulus of the PLA/PHBV ... -
Morphology and thermal degradation studies of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) biodegradable polymer blend nanocomposites with TiO2 as filler
( Elsevier , 2015 , Article)The morphology and thermal stability of melt-mixed poly(lactic acid) (PLA)/poly(ε-caprolactone) (PCL) blend nanocomposites with small amounts of TiO2 nanoparticles were investigated. The nanoparticles were mostly located ... -
Synergistic effect of expanded graphite, diammonium phosphate and Cloisite 15A on flame retardant properties of EVA and EVA/wax phase change blends
( Springer , 2015 , Article)The influence of the introduction of expanded graphite (EG), as well as combinations of EG with Cloisite 15A clay and diammonium phosphate (DAP), into EVA and an EVA/wax blend on the thermal stability and flammability of ...
